PELATIHAN PEMBUATAN SOKET KAKI PALSU MENGGUNAKAN BAHAN BAHAN KOMPOSIT SERAT BAMBU

Main Article Content

Agustinus Purna Irawan
I Wayan Sukania
Paula T. Anggarina

Abstract

Indonesia is a country rich in natural fibers. Natural fibers have the potential to be developed further into alternative products that are beneficial for the welfare of society. Natural fibers, including bamboo, hemp and rattan, have the potential to be developed into cheap, strong, safe, and comfortable biomaterials. One product that can be developed based on natural fiber composites is a prosthetic leg socket. In this community service activity, manufacturing technology use to build prosthetic sockets includes the usage of bamboo fiber composite materials and an epoxy matrix. One of the Community service activities carried out is the training for Small and Medium Enterprises engaged in the manufacture and marketing of prosthesis products, to produce socket prostheses using epoxy bamboo fiber composite materials. Through this activity, it is hoped that the appropriate technology that has been obtained through research activities funded by the Higher Education research grant, can be more beneficial for Small and Medium Enterprises and be used in the production process of socket prostheses which are cheaper, stronger, environmentally friendly and made with materials which are still abundant. Based on the results of these community service activities, some training has been given to Small and Medium Enterprises so that they can produce prosthetic leg sockets made of bamboo fiber composite material.


ABSTRAK

Indonesia adalah negara yang kaya dengan serat alam. Serat alam berpotensi untuk terus dikembangkan menjadi produk alternatif yang bermanfaat bagi kesejahteraan masyarakat. Serat alam antara lain bambu, rami dan rotan, sangat berpotensi untuk dikembangkan menjadi biomaterial yang murah, kuat, aman, dan nyaman. Salah satu produk yang dapat dikembangkan berbasis komposit serat alam adalah soket kaki palsu. Pada kegiatan pengabdian pada masyarakat ini, diimplementasikan teknologi manufaktur pembuatan soket kaki palsu dengan menggunakan bahan komposit serat bambu dan matriks epoksi. Kegiatan pengabdian pada masyarakat yang dilaksanakan adalah pelatihan kepada UMKM yang bergerak di bidang pembuatan dan pemasaran produk prosthesis, untuk memproduksi soket prosthesis dengan menggunakan bahan komposit serat bambu epoksi. Melalui kegiatan ini, diharapkan teknologi tepat guna yang telah diperoleh melalui kegiatan penelitian yang dibiayai oleh hibah penelitian Dikti, dapat lebih bermanfaat bagi Usaha Kecil dan Menengah dan digunakan dalam proses produksi soket prosthesis yang lebih murah, kuat, ramah lingkungan dan bahan yang melimpah. Berdasarkan hasil kegiatan pengabdian kepada masyarakat, telah diberikan pelatihan kepada Usaha Kecil dan Menengah, sehingga dapat memproduksi soket kaki palsu dari bahan komposit serat bambu

 

Article Details

How to Cite
Irawan, A. P., Sukania, I. W., & Anggarina, P. T. (2021). PELATIHAN PEMBUATAN SOKET KAKI PALSU MENGGUNAKAN BAHAN BAHAN KOMPOSIT SERAT BAMBU. Jurnal Bakti Masyarakat Indonesia, 3(2). https://doi.org/10.24912/jbmi.v3i2.11644
Section
Articles

References

ASTM.(2003). Annual Book of ASTM Standard. West Conshohocken.

Bhavana., Riazi, S., Rahmanian, S. (2009). Mechanical Properties of Carbon Hybrid Braided Structure for Lower Limb Prosthesis. A Project Report. The Faculty of the Department of General Engineering. San Jose State University.

Biagiotti, J., Puglia, D., Torre, L., Kenny, J.M. (2004). A Systematic Investigation on The Influence of the Chemical treatment of Natural Fibers on the Properties of Their Polymer Matrix Composites. Polymer Composites. Vol. 25 (No. 5). 470-479.

Braddom, R.L. (2000). Physical medicine & rehabilitation. Second Edition. W.B. Saunders Company. Philadelphia

BS ISO 10328-3:1996. Prosthetics, Structural Testing of Lower-Limb Prostheses, Principal Structural Tests. www.iso.org.

Campbell, J.A.,(2002). Material Selection in an above Knee Prosthetic Leg.Engineering Materials. Department of Engineering, Australian National University

Chandler A. Phillips, CA. (2000). Human Factor Engineering. John Wiley & Sons, Inc. New York.

Current,T.A., Kogler,GF., Barth, DG. (1999). Static Structural Testing of Transtibial Composite Sockets. Prosthetics and Orthotics International. Vol. 23. 113-122.

Diharjo, K dan Nuri. (2006). “ Studi Sifat Tarik Bahan Komposit Berpenguat Serat Ramie, bambu, dan rotan Dengan Matrik Unsaturated Poliester”. Prosiding Seminar Nasional Teknik Mesin Universitas Petra. Surabaya.

F.G. Torres, F.G., Diaz, R.M. (2004). Morphological Characterisation of Natural Fibre Reinforced Thermoplastics (NFRTP) Processed by Extrusion, Compression and Rotational Moulding. Polymers & Polymer Composites. Vo. 12 (No. 8), 705 – 718.

Gremeaux, V., Iskandar, M., Kervio, G., Perennou, D., Casillas, JM. (2008). Comparative Analysis of Oxygen Uptake in Elderly Subjects Performing Two Walk Tests: The Six Minute Walk Test and The 200-m Fast Walk Test. Clinical Rehabilitation. Vol. 22. 162 – 168.

Herbert,N., David, S., William, D.S., William, I. (2005). A Preliminary Investigation in to The Development of 3-D Printing of Prosthetic Socket. Journal of Rehabilitation Research and Development. Vol. 42 (No. 2) March/April. 141–146

H.N. Shasmin,HN., Osman, NAA., Latif, LA. (2008). Economical Tube Adapter Material in Below Knee Prosthesis. Biomed. Proceedings 21. 407 – 409.

Ifannossa, AAE., Bambang Kismono Hadi, BK., Kusni, M “Analisis Kekuatan Tarik Komposit Serat Bambu Laminat Helai Dan Wooven Yang Dibuat Dengan Metode Manufaktur Hand Lay-Up”. Prosiding Seminar Nasional Tahunan Teknik Mesin (SNTTM) ke 9 Tahun 2010. 35 – 42.

Irawan, AP., Widjajalaksmi, TPSK K., Reksoprodjo, AH.S.(2009). Komposit Laminate Rami Epoksi Sebagai Bahan Alternatif Socket Prsothesis. Jurnal Teknik Mesin UK. Petra. 11(1), 41 – 45.

Irawan, AP., Widjajalaksmi, TPSK K., Reksoprodjo, AH.S.(2011). Pengaruh Kekerasan dan Kekasaran Permukaan Prototipe Socket Prosthesis Terhadap Kenyamanan Pengguna. Jurnal Teknik Mesin ITS. 11 (1). 1 – 7.

Irawan, AP., Widjajalaksmi, TPSK K., Reksoprodjo, AH.S.(2011).Tensile and Flexural Strength of Ramie Fiber Reinforced Epoxy Composites for Socket Prosthesis Application. International Journal of Mechanical and Material Engineering. 6 (.1). A46-50.

Irawan, AP.,(2010). Rekayasa Komposit Serat Alam Prototipe Produk Prosthesis Anggota Gerak Bawah (Lower Limb Prosthesis). Disertasi. Departemen Teknik Mesin FT UI.

Jamasri. (2008). “Peluang Dan Tantangan Pengembangan Komposit Serat Alam Di Indonesia”. Prosiding Seminar Nasional Mesin dan Industri (SNMI4). Jurusan Teknik Mesin Fakultas Teknik Universitas Tarumanagara. Jakarta, 2008,1 – 13.

John Craig, J.(2005). Prosthetic Feet for Low-Income Countries. Journal of Prosthetics and Orthotics. 17. (4S). 27 – 49.

Kaczmar, J.W., Pach, J., Kozlowski, R.(2007). Use of Natural Fibres as Fillers for Polymer Composites. International Polymer Science and Technology. 34 (6). 45 –50.

Kaw, AK. (1997). Mechanics of Composite Materials. CRC Press. Boca Raton. New York

Kosak, M., Smith, T.( 2005 ). Comparison of the 2-, 6-, and 12-minute Walk Test in Patients with Stroke. Journal of Rehabilitation Research & Development. 42. (1), January/February. 103-108.

Kusumaningsih, W.(2004). Fenomena Fantom Pasca Amputasi Anggota Gerak Akibat Trauma dan Faktor Yang Mempengaruhinya. Program Studi Doktor Ilmu Kedokteran, Fakultas Kedokteran Universitas Indonesia. September.

Linde, H. et al.(2004). A systematic Literature Review of The Effect of Different Prosthetic Components On Human Functioning With A Lower-Limb Prosthesis. Journal of Rehabilitation Research and Development. 41 (4.) July/August. 555-570.

Ling-Ping, H., Yong,T., Lu-Lin, W.( 2008). Study on Ramie, bambu, dan rotane Fiber Reinforced Polypropylene Composite (RF-PP) and Its Mechanical Properties. Advanced Materials Research. 41-42, 313-316.

Phillips, SL., Craelius, W. (2005). Material Properties of Selected Prosthetic Laminates. Journal of Prosthetics and Orthotics. 17.(1). 27-32.

Suzuki,K., Yamada, Y., Handa, T., Imada, G., Iwaya, T., Nakamura, R. ( 1999). Relationship Between Stride Length and Walking Rate in Gait Training for Hemi paretic Stroke Patients. American Journal of Physical Medicine & Rehabilitation. 78. (2). 147 – 152.

Taylor, DA., Gilbert, JC., Lautenschlager, EP. (1992). Testing of Composite Materials Used in Orthotics and Prosthetics. Journal of The Association of Children’s Prosthetic-Orthotic Clinics. Vol. 27. (Nu. 2). 62.

Vitriana. (2002). Rehabilitasi Pasien Amputasi Bawah Lutut Dengan Menggunakan Immediate Post-Operative Prosthetic.Bagian Ilmu Kedokteran Fisika dan Rehabilitasi FK UNPAD RSUP dr. Hasan Sadikin dan FK UI RSCM