PELATIHAN ANALISIS HASIL UJI KENYAMANAN PENGGUNA KAKI PALSU DENGAN MENGGUNAKAN METODE SIX MINUTE WALK TEST METHOD
Article Sidebar
Main Article Content
Abstract
Gait analysis aims to obtain data and information related to the use of the prosthesis by respondents, in order to obtain data on walking speed (m/s), stride length (cm), number of steps per minute, total stride length per one walking cycle, the total distance traveled over a certain period of time, the energy required to walk and any abnormalities that may occur during the analysis process. This activity is closely related to the ease of using the prosthesis, security and safety, and comfort when walking with the help of the prosthesis. Analysis of the walking pattern was carried out by means of the respondent walking normally for 6 minutes using a prosthesis prototype (Six Minute Walk Test Method). This training is given to Micro, Small and Medium Enterprises (MSMEs) which are partners in community service activities. MSME partners produce prosthetic limbs by applying appropriate technology that has been developed by the Research Team. The results of the training show that MSMEs Partners can carry out their own convenience test well. The results obtained are MSMEs Partners can measure the comfort of prosthetic users with the criteria that have been generated from the development of appropriate technology produced by the Research Team
ABSTRAK:
Analisis pola jalan atau Gait Analysis bertujuan untuk mendapatkan data dan informasi yang berkaitan dengan penggunaan prosthesis oleh responden, sehingga diperoleh data kecepatan jalan (m/s), panjang langkah (cm), jumlah langkah per menit, panjang langkah total per satu siklus berjalan, jarak tempuh total selama kurun waktu tertentu, energi yang diperlukan untuk berjalan dan kelainan yang mungkin terjadi selama proses analisis. Semua yang dilakukan sangat berkaitan dengan kemudahan dalam menggunakan prosthesis, keamanan dan keselamatan, serta kenyamanan saat berjalan dengan bantuan prosthesis. Analisis pola jalan dilakukan dengan cara responden berjalan normal selama 6 (enam) menit menggunakan prototipe prosthesis atau disebut dengan metode Six Minute Walk Test Method. Pelatihan ini diberikan kepada UMKM Mitra yang memproduksi kaki palsu dengan menerapkan teknologi tepat guna yang telah dikembangkan oleh Tim Peneliti. Pelatihan dilaksanakan di tempat UMKM Mitra untuk semua karyawannya. Hasil Pelatihan menunjukan bahwa UMKM Mitra dapat melaksanakan sendiri uji kenyamanan dengan baik. Hasil yang diperoleh adalah UMKM Mitra dapat melakukan pengukuran kenyamanan pengguna kaki palsu dengan kriteria yang telah dihasilkan dari pengembangan teknologi tepat guna yang dihasilkan oleh Tim Peneliti.
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
This work is licensed under a Jurnal Bakti Masyarakat Indonesia https://creativecommons.org/licenses/by-nc-sa/4.0/
References
Bhavana, Salma Riazi, S., &Rahmanian,S. (2009). Mechanical Properties of Carbon Hybrid Braided Structure for Lower Limb Prosthesis. A Project Report. The Faculty of the Department of General Engineering. San Jose State University.
Biagiotti, J., Puglia, D., Torre, L., Kenny, J.M ., Arbelaiz,A., Cantero,G., Marieta,C., Llano-Ponte,T.,& Mondragon,I. (2004). A systematic investigation on the influence of the chemical treatment of natural fibers on the properties of their polymer matrix composites. Polymer Composites. 25(5). 470-479.
Braddom, R.L. (2000). Physical Medicine & Rehabilitation. Second Edition. W.B. Saunders Company. Philadelphia.
Campbell, J.A. (2002). Material Selection in an above Knee Prosthetic Leg. Engineering Materials. Department of Engineering, Australian National University
Craig, J. (2005). Prosthetic Feet for Low-Income Countries. Journal of Prosthetics and Orthotics. 17(4). 27 – 49.
Gremeaux, V., Iskandar,M., Kervio, G., Perennou, D., & Casillas,J.M. (2008). Comparative analysis of oxygen uptake in elderly subjects performing two walk tests: the six minute walk test and the 200-m fast walk test. Clinical Rehabilitation. 22 162 – 168.
Herbert, N., Simpson,D.,Spence, W.D., & Ion,W.J. (2005). A Preliminary Investigation into The Development of 3-D Printing of Prosthetic Socket. Journal of Rehabilitation Research and Development. 42(2.). 141–146
He Ling-Ping, Tian Yong, Wang Lu-Lin (2008). Study on ramie, bambu, dan rotane fiber reinforced polypropylene composite (rf-pp) and its mechanical properties. Advanced Materials Research. 41, 313-316.
Ifannossa, A.A.E., Hadi, B.K.,& Kusni,M. (2010). Analisis Kekuatan Tarik Komposit Serat Bambu Laminat Helai Dan Wooven Yang Dibuat Dengan Metode Manufaktur Hand Lay-Up. Prosiding Seminar Nasional Tahunan Teknik Mesin (SNTTM) ke 9. pp. MIV35 – 42.
Irawan, A.P., Soemardi,T.P., Kusumaningsih, W.A, &. H.S. Reksoprodjo (2011) Pengaruh Kekerasan dan Kekasaran Permukaan Prototipe Soket Prosthesis Terhadap Kenyamanan Pengguna. Jurnal Teknik Mesin ITS. 11 (1), 1-7.
Irawan, A.P., T.P , Kusumaningsih, W., A. & Reksoprodjo , H.S(. 2011) Tensile and Flexural Strength of Ramie Fiber Reinforced Epoxy Composites for Socket Prosthesis Application. International Journal of Mechanical and Material Engineering. 6 (1), 46-50.
Irawan, A.P., Sukania, I.W.,& Anggarina, P.T., Danendra, A.R.,& Baskara , G.D. (2020) “Socket prosthesis manufacturing process made from bamboo fiber composite materials”. IOP Conference Series: Materials Science and Engineering. 852-012042
Kaczmar, J.W., Pach, J., & R. Kozlowski, R. (2007). Use of natural fibres as fillers for polymer composites. International Polymer Science and Technology. 34 (6) T/45 – T/50.
Kosak, M., & Smith ,T.(2005). Comparison of the 2-, 6-, and 12-minute walk test in patients with stroke. Journal of Rehabilitation Research & Development.. 42(1) 103-108.
Kusumaningsih ,W.(2004). Fenomena Fantom Pasca Amputasi Anggota Gerak Akibat Trauma dan Faktor Yang Mempengaruhinya. Program Studi Doktor Ilmu Kedokteran, Fakultas Kedokteran Universitas Indonesia. September.
Phillips, C.A (2000). Human Factor Engineering. John Wiley & Sons, Inc. New York.
Phillips, S.L & Craelius, W.(2005). Material properties of selected prosthetic laminates. Journal of Prosthetics and Orthotics. 17(1) 27-32.
Shasmin, H.N., Abu Osman, N.A., Abd Latif, L. (2008). Economical Tube Adapter Material in Below Knee Prosthesis. In: Abu Osman, N.A., Ibrahim, F., Wan Abas, W.A.B., Abdul Rahman, H.S., Ting, HN. (eds) 4th Kuala Lumpur International Conference on Biomedical Engineering 2008. IFMBE Proceedings, vol 21. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-540-69139-6_103
Suzuki,. K., Yamada,, Y ., Handa,T., Imada, G., Iwaya, T,,& Nakamura, R. (1999). Relationship between stride length and walking rate in gait training for hemi paretic stroke patients. American Journal of Physical Medicine & Rehabilitation. 78 (2),147 – 152
T.A. Current, G.F. Kogler, D.G. Barth (1999). Static structural testing of transtibial composite sockets. Prosthetics and Orthotics International. 23. 113-122.
Taylor, D.A., Gilbert, J.C., Lautenschlager ,E.P. (1992) . Testing of composite materials used in orthotics and prosthetics. Journal of The Association of Children’s Prosthetic-Orthotic Clinics. 27.(2). 62
Torres F.G, & Díaz R. M. (2004) Morphological Characterisation of Natural Fibre Reinforced Thermoplastics (NFRTP) Processed by Extrusion, Compression and Rotational Moulding. Polymers and Polymer Composites. 12(8):705-718. doi:10.1177/096739110401200807
van der Linde, H., Hofstad, C.J, Geurts, A.C., H, Postema,K, Geertzen,J.H.B., & van Limbeek,J (2004)A systematic Literature Review of the Effect of Different Prosthetic Components on Human Functioning with A Lower-Limb Prosthesis. J Rehabil Res Dev. 41(4).555-70.doi: 10.1682/jrrd.2003.06.0102.
Vitriana. Rehabilitasi Pasien Amputasi Bawah Lutut Dengan Menggunakan Immediate Post-Operative Prosthetic (2002). Bagian Ilmu Kedoktera Fisika dan Rehabilitasi FK UNPAD RSUP dr. Hasan Sadikin dan FK UI RSCM.
Yong, T., He Li-ping, H., Lu-lin, W.,& We-ipin., Qu (2008) Study of Mechanical Properties of Ramie Fiber Reinforced Polypropylene Compounds for Automobile Industry[J]. Journal of Materials Engineering, 1:21-24,33.