Pemrograman Sistem Kontrol Untuk Mendeteksi Gangguan Dan Mengoreksi Format Tampilan Video Wall Secara Otomatis

Main Article Content

Hans Fernandi Halim
Yohanes Calvinus

Abstract

Video wall is a system that some media displays combined as close as possible in a matrix (column and row) to make a bigger display. Sometimes the display does not show perfectly due to of power supply issue in one of the monitors. The purpose of this design is to program a control system that not only can operate the video wall but also can detect power supply issue and reformat the display area template automatically. This programming uses Netlinx studio software and TPdesign4. The hardware is AMX Netlinx Integrated Controller NI3100, Modero View Point  MVP-9000i, Kramer Matrix Swticher VS-66HDCP and Monitor LG 47WV50. Subprogram which  added is “Deteksi Gangguan” Subprogram, “Koreksi Format Tampilan” Subprogram and “Notifikasi SMS” Subprogram. The operating process of these programs are the master controller sends ASCII code to each monitor then the monitor gives a feedback which indicates the power supply status. If power supply detected as an issue then “Koreksi Format Tampilan” subprogram will be executed and the “Notifikasi SMS” will also be executed. The test results show that the subprograms works perfectly as designed, but it needs some program modification to apply it to the whole system.

 Video wall adalah suatu sistem dimana beberapa media tampilan digabungkan sedekat mungkin dalam sebuah matriks (kolom dan baris) untuk membentuk satu tampilan yang besar. Terkadang hasil tampilan tidak selalu sesuai dengan kehendak pengguna yang disebabkan adanya gangguan catudaya pada salah satu monitor yang bersangkutan. Tujuan dari perancangan program ini adalah merancang sebuah program sistem kontrol yang tidak hanya mengendalikan operasi video wall, tetapi juga mampu mendeteksi adanya gangguan dan melakukan koreksi format tampilan secara otomatis.Perancangan program ini menggunakan perangkat lunak Netlinx Studio dan TPDesign4. Perangkat keras yang digunakan adalah AMX Netlinx Integrated Controller NI3100, Modero View Point MVP-9000i, Kramer Matrix Swticher VS-66HDCP dan Monitor LG 47WV50. Subprogram yang ditambahkan adalah subprogram Deteksi Gangguan, Subprogram Koreksi Format Tampilan, dan Subprogram Notifikasi SMS. Proses operasi dari program ini adalah pengendali induk mengirimkan kode ASCII ke setiap monitor kemudian monitor akan memberikan umpan balik keadaan dari catudaya, apabila ditemukan adanya gangguan, subprogram Koreksi Format Tampilan mengubah format tampilan video wall sesuai dengan ketentuan serta subprogram Notifikasi SMS mengirimkan SMS kepada teknisi terkait untuk memberitahukan bahwa video wall mengalami gangguan. Hasil pengujian subprogram menunjukan kesesuaian fungsi operasi dengan rancang bangun. Namun dibutuhkan sedikit modifikasi program ketika diaplikasikan ke sistem secara keseluruhan untuk dapat melakukan fungsinya dengan baik.

Article Details

How to Cite
[1]
H. F. Halim and Y. Calvinus, “Pemrograman Sistem Kontrol Untuk Mendeteksi Gangguan Dan Mengoreksi Format Tampilan Video Wall Secara Otomatis”, TESLA, vol. 20, no. 1, pp. 38–48, Feb. 2019.
Section
Halaman depan

References

. S.Robert, Videowalls – The Book of the Big Electronic Image. London: Focal Press,1997. p.24.

. Suntec Singapore Wins New Guinness World Record, Febuari 8, 2014. http://www.suntecsingapore.com/suntec-singapore-wins-new-guinness-world-record/

. Extron Electronics. Extron Videowalls System Design Guide. California: Extron Electronics, 2012. h.37-39.

Most read articles by the same author(s)