SIMULASI PERBANDINGAN TEGANGAN STATIS KOMPONEN PINTU MOBIL BERBAHAN ALUMINIUM DAN KOMPOSIT BAMBU
Article Sidebar
Main Article Content
Abstract
The car door is one of the important components in a car, as a means of getting in and out of passengers and goods. This study aims to compare the factors of safety, strength, shear stress, and dimensional changes due to the received load, between car doors made of bamboo composite material and car doors made of aluminum. The research method is carried out in the form of simulating the load on the car door using Fusion Autodesk 360 software. The data used in this study is secondary data obtained from data analysis from journal articles related to bamboo and aluminum fiber composite materials. Strength simulation using loads of 100 N, 150 N, and 200 N refers to the strength simulation reference. Based on the simulation results, it can be concluded that the car door made of bamboo composite has good yield strength, safety factor, and shear strength and has the potential to be an alternative material to replace aluminum car doors, especially at low loads. The results of modeling using software with the above load, the safety factor values are in the range (10-15) and the displacement is in the range (3-4) mm. The results of this simulation become one of the references in further research and development.
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
References
Mochamad Sulaiman, Muhammad Hudan Rahmat, 2018, Kajian Potensi Pengembangan Material Komposit Polimer Dengan Serat Alam Untuk Produk Otomotif, Sistem.
Alfan Ekajati Latief, Nuha Desi Anggraeni, Dedy Hernady, 2020, Karakterisasi Mekanik Komposit Matriks Polipropilena High Impact Dengan Serat Alam Acak Dengan Metode Hand Lay Up Untuk Komponen Automotive, Jurnal Rekayasa Hijau.
Li Y., Mai Y.W., Lin Y., 2020, Sisal fibre and its composites: a review of recent developments.
Gusti Made Oka, Andreas Triwiyono, Ali Awaludin, Suprapto Siswosukarto, 2014, Effects of node, internode and height position on the mechanical properties of gigantochloa atroviolacea bamboo, Procedia Engineering.
Morisco, 2005, Bamboo Technology, Departemen of Civil Engineering and Environment, Gadjah Mada University, Indonesia.
Navdeep Kumar, Dipayan Das, 2017, Fibrous biocomposites from nettle (Girardinia diversifolia) and poly (lactic acid) fibers for automotive dashboard panel application, Composites Part B: Engineering.
Agustinus Purna Irawan, I Wayan Sukania, 2013, Kekuatan Tekan dan Flexural Material Komposit Serat Bambu Epoksi, Jurnal Teknik Mesin, 2013
F. P. La Mantia, M. Morreale, 2011, Green Composites: A Brief Review”, International Journal of Green Composites, p. 579, Palermo, Italy.
Andika Wisnujati, 2018, Analisis sifat fisik dan mekanik paduan aluminium dengan variabel suhu cetakan logam 450 dan 500 derajat celcius untuk manufaktur poros berulir, Yogyakarta.
Murdaningsih Dwi, 2021, Nissan Luncurkan Mobil Berbahan Aluminium.
Hizkia Eben Haezer A.P.A, 2016, Analisa Sifat Akustik Dan Morfologi Material Komposit Polypropylene Berpenguat Serat Bambu Dan Rami.
Shakti S. Chauhan Pankaj Aggarwal, G. S. Venkatesh, R. M. Abhilash, 2018, Mechanical characterization, modelling and application design of bamboo-polypropylene composites, International Journal of Plastics Technology.
Ginting, Jepriandi, 2009, Pembuatan Komposit Matrik Logam Berpenguat Keramik (Al/SiCP) dan Karakterisasinya Melalui Metode Metalurgi Serbuk.
G. N. Anastasia Sahari, 2011, Komposit Matrik Keramik AL2O3/ Al Hasil Proses Directed Melt Oxidation (DIMOX).
Raka Satria Putra, 2019, Alat Bantu Pengujian Kekauan Panel Pintu Mobil. Cimahi.
Mazumdar, Sanjay K., 2002, Composites Manufacturing: Materials, Product, and Process Engineering, CRC Press LLC. Boca Raton, Florida.
Froyen, L. & B. Verlinden, 1994, Aluminium Matrix Composite Materials, TALAT Lecture 1402 University of Leuven, Belgium.
Djamil Sofyan, 2018, Komposit Matriks Polimer, Jakarta: Universitas Tarumanagara.
Hironimus R. Fao, Jahirwan Ut Jasron, Wenseslaus Bunganaen, Kristomus Boimau, 2016 Pengaruh Perlakuan Temperatur terhadap Sifat Mekanik Komposit Hibrid Polyester Berpenguat Serat Buah Lontar dan Serat Kaca.”
Hingmadi, Denianus, 2012, Laporan Penelitian PKL: Keanekaragaman Ciri Morfologi Jenis-Jenis Bambu (Bambusa Sp.) di Kelurahan Teunbaun Kecamatan Amarasi Barat Kabupaten Kupang. Fakultas MIPA-Biologi Universitas PGRI: Nusa Tenggara Timur.
Verma, C.S., Chariar, V. M, 2012, Development of Layered Laminate Bamboo Composite and Their Mechanical Properties, New Delhi: India, AICTE Chanderlok Building, Janpath.
Agustinus Purna Irawan, Adianto, I Wayan Sukania, 2020, Tensile Strength of Car Spoiler Product Based on ABS Plastic and Rattan Fiber Epoxy Composite Materials, IOP Conf. Series: Materials Science and Engineering 725 (2020) 012040.