KEKUATAN TEKAN MATERIAL SPOILER MOBIL BERBASIS KOMPOSIT ROTAN EPOKSI

Article Sidebar

PDF
Published: Nov 9, 2018
DOI: https://doi.org/10.24912/poros.v16i1.6293
Keywords:
compressive strength car spoiler products rattan fiber epoxy reinforced composites

Main Article Content

Agustinus Purna Irawan
Universitas Tarumanagara

Abstract

This study aims to obtain the compressive strength of the material of a car spoiler product that was developed using materials from rattan fiber epoxy reinforced composites material. The car spoiler products are car accessories that also function as one of the equipment related to aerodynamics. The study was conducted by making test samples of rattan fiber epoxy reinforced composites and compared with the compressive strength of plastic spoiler materials obtained from the free market. The testing standard used is the compressive strength test of ASTM D 695. Based on the test results obtained compressive strength of spoiler made of plastic is 47.68 ± 1.37 MPa and rattan fiber epoxy reinforced composites material is 43.49 ± 4.21 MPa, with a compressive strength difference of 8.8%. The compressive strength of modeling results obtained a compressive strength of 47.97 MPa. This result is quite good and the difference is quite small, so the results of the study can be used as a reference for further product development.

Article Details

Issue
Vol. 16 No. 1 (2018): Jurnal Imiah Teknik Mesin POROS
Section
Articles

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Author Biography

Agustinus Purna Irawan, Universitas Tarumanagara

Prodi Teknik Mesin - Fakultas Teknik

References

. Sandy Minkah Kyei. Composite Car Rear Spoiler. Thesis. The Energy and Material Technology Department. Arcada University of Applied Sciences. 2014. [2]. A. Sunanda, M. Siva Nayak. Analysis of NACA 2412 for Automobile Rear Spoiler Using Composite Material. International Journal of Emerging Technology and Advanced Engineering. Vol 3, Issue 1, January 2013. pp 236-242. [3]. Hitoshi Fukuda, Kazuo Yanagimoto, Hiroshi China, Kunio Nakagawa. Improvement of Vehicle Aerodynamics by Wake Control. JSAE Review 16. 1995. pp 151-155. [4]. G. M. Le Good, J. P. Howell, M. A. Passmore, A. Cogotti. A Comparison of On-Road Aerodynamic Drag Measurements with Wind Tunnel Data from Pininfarina and MIRA. International Congress and Exposition Detroit. Michigan. February 23-26. 1998. [5]. Xu-xia Hu, Eric T.T. Wong. A Numerical Study On Rear-spoiler of Passenger Vehicle. World Academy of Science, Engineering and Technology 57. 2011. pp 636-641. [6]. Ardiansyah Rahman, Ahmad Farid, Suriansyah. Pengaruh Penggunaan Spoiler Pada Model Kendaraan Sedan Terhadap Tekanan Hisap Dalam Terowongan Angin. PROTON. Vol. 6 No 1. 2014. pp 1-7.

. Soejono Tjitro, Agus Aria Wibawa. Perbaikan Karakteristik Aerodinamika pada Kendaraan Niaga. Jurnal Teknik Mesin Vol. 1, No. 2, Oktober 1999. pp. 108-115. [8]. A. Balaji, B. Karthikeya, C. Sundar Raj. Bagasse Fiber - The Future Biocomposite Material: A Review. International Journal of ChemTech Research. Vol.7. No. 01. 2014. pp. 223-233. [9]. Suddell B. Industrial Fibres: Recent and Current Developements. In Proceedings of the Symposium on Natural Fibres. 2009, p. 71 - 82. [10]. Agustinus Purna Irawan, Tresna P. Soemardi Widjajalaksmi K., Agus H.S. Reksoprodjo. Komposit Laminate Rami Epoksi Sebagai Bahan Alternatif Socket Prsothesis. Jurnal Teknik Mesin UK. Petra. Vol. 11 No. 1. 2009. pp. 41-45. [11]. Agustinus Purna Irawan, Tresna P. Soemardi Widjajalaksmi K., Agus H.S. Reksoprodjo. Pengaruh Kekerasan dan Kekasaran Permukaan Prototipe Socket Prosthesis Terhadap Kenyamanan Pengguna. Jurnal Teknik Mesin ITS. Vol. 11 No. 1. 2011. pp. 1-7. [12]. Agustinus Purna Irawan, Tresna P. Soemardi Widjajalaksmi K., Agus H.S. Reksoprodjo. Tensile and Flexural Strength of Ramie Fiber Reinforced Epoxy Composites for Socket Prosthesis Application. International Journal of Mechanical and Material Engineering. Indexed by SCOPUS, Vol. 6 No. 1. April. 2011. pp. 46-50. [13]. Agustinus Purna Irawan, I Wayan Sukania. Mechanical Characteristics Rattan Fiber Reinforced Epoxy Composites (RECO) as Above Knee Socket Prosthesis Materials. International Conference on Innovation in Polymer Science and Technology (IPST2011). Asian Polymer Association (APA) dan Indonesian Polymer Association (HPI). DenpasarBali, 28 Nov.-1 Des. 2011. ISBN: 978-602-7776-06-7. pp. 64-70 [14]. Agustinus Purna Irawan, I Wayan Sukania. Tensile and Impact Strength of Bamboo Fiber Reinforced Epoxy Composite as Alternative Materials for Above Knee Prosthesis Socket. Prosiding of 2nd International Conference on Sustainable Technology Development. 31 October 2012. ISBN: 978-602-7776-06-7. pp: M.109-M.115. [15]. Agustinus Purna Irawan, Adianto, I Wayan Sukania, M. Agung Saryatmo, Karakteritik Mekanik Material Spoiler Mobil Berbasis Bahan Plastik. Prosiding Seminar Nasional Teknologi dan Sains (SNTS) II 2016. pp. TM-25-TM-31. [16]. G. Venkatesha Prasanna, K.Venkata Subbaiah. Modification, Flexural, Impact, Compressive Properties & Chemical Resistance of Natural Fibers Reinforced Blend Composites. Malaysian Polymer Journal, Vol. 8 No. 1, 2013. pp 38-44. [17]. L. Onal, Y. Karaduman. Mechanical Characterization of Carpet Waste Natural FiberReinforced Polymer Composites. Journal of Composite Materials. Vol. 43. 2009. pp. 1-18.