SIMULASI STRESS PADA MESIN PENIRIS MINYAK BAWANG GORENG DENGAN KAPASITAS TIGA KILOGRAM

Article Sidebar

PDF (Bahasa Indonesia)
Published: Apr 22, 2024
DOI: https://doi.org/10.24912/poros.v19i2.26778
Keywords:
mechanical simulation strength of the material calculate of the design of the material.

Main Article Content

Elvan Indra
a:1:{s:5:"en_US";s:24:"Universitas Tarumanagara";}
Alessandro Darren Halim
Universitas Tarumanagara
Muhammad Ilham Sekayu
Universitas Tarumanagara
Rosehan
Unversitas Tarumanagara

Abstract

Every food that is frequently consumed nowadays usually uses cooking oil as a frying tool. Indonesian people, both in urban and rural areas, consume fried foods in their daily lives. Therefore, by designing an oil drainer, we can overcome the problem in terms of time in draining oil from fried onions. In this oil dryer there are main components to drive the oil dryer system in the form of perforated baskets, shafts, AC electric motors, v-belts, pulleys, bearings, and table. The material used in this oil dryer uses food grade materials, for the safety and health of users of this oil dryer. The oil dryer has a capacity of 3 kg at one time the frying of fried onions is then calculated to find out which material is suitable for use in the oil slicer, then performs a simulation to determine the strength of the material selection used.

Article Details

Issue
Vol. 19 No. 2 (2023): Jurnal Ilmiah Teknik Mesin POROS
Section
Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Author Biographies

Elvan Indra, a:1:{s:5:"en_US";s:24:"Universitas Tarumanagara";}

Mahasiswa Teknik Mesin

Alessandro Darren Halim, Universitas Tarumanagara

Mahasiswa Teknik Mesin

Muhammad Ilham Sekayu, Universitas Tarumanagara

Mahasiswa Teknik Mesin

Rosehan, Unversitas Tarumanagara

Program Studi Teknik Mesin

References

Wahyu,sugandi. 2018. Analisis Teknik dan uji kinerja mesin peniris minyak. Fakultas Teknologi Industri Pertanian Universitas Padjadjaran.

Materi Perkuliahan Elemen Mesin I Pertemuan 2, “Beban, Tegangan, dan SF” oleh Prof. Dr. Ir. Agustinus. P. I.

Michael F. Ashby. Material Selection in Mechanical Design. Third Edition 2005.

Guifeng Jia, S. Y. a. C. T., (2011) ‘Fault Diagnosis of Roller Bearing Based on PCA and Multi-class Support Vector Machine’. Wuhan China, Huazhong

Agustinus Purna Irawan, Diktat Elemen Mesin, Jakarta.

Yefrichan, (2012) ‘Faktor keamanan safety factor dalam perancagan elemen mesin’.

“Factors of Safety”, Engineering Tool Box. 2010 (Online)

Pembahasan soal mencari kecepatan Pulley. (n.d.) Retrieved 10 Juni 2023.

Rumusan Daya dan Contoh Soal Menghitung Daya Listrik (+Jawaban). (n.d.). Retrieved 8 Juni 2023

Akbar BS. (2012). Pembuatan Poros Transmisi Pada Mesin Modifikasi Camshaft NOKEN AS. Laporan Proyek Akhir. Yogyakarta.