PERANCANGAN MESIN PEMIPIH DAN PEMOTONGAN ADONAN MIE PENGGERAK MOTOR LISTRIK
Article Sidebar
Read Counter : 157
Download : 102
Main Article Content
Abstract
Noodles are foods that we often encounter wherever they are, such as at street vendors, restaurants, and even instant food. This noodle flattening and cutting machine is a tool that is used to make it easier for producers or street vendors to make it easier to print their own noodles. Based on this, this design was carried out to produce a flattening machine design and cutting noodle dough using an electric motor. The design of the flattening and dough cutting machine is carried out by calculation and drawn using Autodesk Fusion 360 software. From the calculation, it is obtained that the electric motor used is 0.5 HP with a rotation of 1400 r/min. The motor drives 4 pulleys that are connected to a belt connected to each other, and has an efficiency value in the transmission system of = 95%
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
References
T. Genberg. Motor Fundamentals, Vaasa: University of Applied Sciences, 2017.
Tri Rahardi, Ari Saddam. Perancangan Mesin Pemipih dan Pemotong Adonan Mie (Yogyakarta:
Universitas Negeri Yogyakarta, 2012).
http://tekpan.unimus.ac.id/wp-content/uploads/2013/07/Teknologi-Pengolahan-Mie-teori-danpraktek.pdf diakses pada tanggal 27 Desember 2020
Agustinus Purna Irawan, 2007, Diktat Kuliah Mekanika Teknik (Statika Struktur)
https://www.dnm.co.id/pengertian-conveyor-belt-dan-fungsinya-ini-penjelasanlengkapnya/
diakses pada tanggal 16 Desember 2020
https://astromesin.com/mesindoughsheeter/#:~:text=Mesin%20Dough%20Sheetr%20adalah%2
mesin,daripada%20menggunakan%20tanga%20atau%20manual. diakses pada tanggal 21
Desember 2020.
http://repository.stimart-amni.ac.id/1735/2/BAB%202.pdf diakses pada tanggal 15 Desember
ASM International, Metallographer’s Guide: Irons and Steels, Ohio: ASM International,2002.
Perancangan mesin pemipih dan pemotongan adonan mie penggerak motor listrik (E.P. Hidayat, dkk) 111
https://arudamkanateknik.wordpress.com/2019/12/20/gambar-teknik-manufaktur-9-2-
machinedrawing/ Diakses pada tanggal 17 Januari 2021.
https://www.geraiteknologi.com/2021/09/pengertian-bearing-dan-macam-macam-laher.html
diakses pada tanggal 20 Desember 2020.
https://www.kugellager-express.de/self-aligning-ball-bearing-1315-tn-conical-75x160x37-mm
diakses pada tanggal 20 Desember 2020.
http://repository.usu.ac.id/bitstream/handle/123456789/67691/Chapter%20II.pdf?sequence=4&
isAllowed =y diakses pada tanggal 19 Januari 2021.
https://core.ac.uk/download/pdf/11066643.pdf diakses pada tanggal 18 April 2021