PERANCANGAN MESIN PENGADUK PAKAN TERNAK BERKAPASITAS 75 kg MENGGUNAKAN SISTEM ARDUINO

Article Sidebar

Cover Vol 17 No 2
PDF
Published: Dec 30, 2021
DOI: https://doi.org/10.24912/poros.v17i2.20037
Keywords:
Feed mixer machine G. Pahl and W. Beitz methods machine design

Main Article Content

Djoko W Karmiadji
Jurusan Teknik Mesin, Universitas Pancasila
Zulfikri Sy Tampa

Abstract

The need for animal feed in Indonesia is very high because of the increasing demand for processed meat. And one of the reasons is also due to the government's program to meet Indonesia's food security to reduce dependence on meat imports. To support this, animal feed is one of the key factors to improve the quality of livestock. The feed mixer machine is a solution to make it easier for breeders to mix the feed mixture. With this machine will cut costs and production time for farmers to produce the feed. The result obtained is design data in the form of machine images using Solidwork software. The frame of this machine uses hollow 1023 Carbon Steel Sheet 40 × 40 mm with a thickness of 2 mm and the body of this machine uses ASTM A36 Steel material thickness of 2 mm. The overall dimensions of this engine are 1400 mm long, 665 mm wide and 1133 mm.

Article Details

Issue
Vol. 17 No. 2 (2021): Jurnal Ilmiah Teknik Mesin Poros
Section
Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

References

. Basyir, Abdul, dkk. 2019. Perancangan Mesin Pengaduk Pakan Ternak Sapi Dengan Sistem Sirkulasi Vertikal Menggunakan Screw Driver. Jurnal Ilmiah “MEKANIK” Teknik Mesin ITM. Vol. 5(1) : 1-9

. Budijono, Agung Prijo, dkk. Penerapan Mesin Pengaduk Pakan Ternak Untuk Meningkatkan Efektivitas dan Efisiensi Proses Pengaduk Pakan Ternak. Jurnal Otopro. Vol 14(1) : 1-5

. Rancang Bangun Mesin Pengaduk Pakan Terak. Jurnal Teknologi Pertanian Gorontalo. Vol 4(1) : 1-6

. Pahl, G., Beitz, W., Feldhusen, J., dan Grote, K. H., Engineering design. A Systematic Approach Third Edition, Germany: springer, 2015.

. Chandra, Dedy (2012). Jurnal Materi Perancangan Produk 8 ( Analisis Fungsi dan morfologi produk).

. Geoffrey Boothroy. 2010. Product Design For Manufacture and Assembly, Marcel Dekker, Inc.

. B. Gustomo. 2015. Pengenalan Arduino dan Pemrogrammannya. Bandung: Informatika Bandung.

. Rhakasywi, D. “Rancang Bangun Elemen Mesin 3D Dengan Solidworks”. Vol. 1, No. 1, pp. 1–116, 2016.

. Khurmi RS Gupta, JK., 2005, Text Book of Machine Design Eurasia, Publising House, ltd Ram Nagar, New Delhi.

.Cajindos, J.R. 2014. Design and Fabrication of HorizontalScrew Type Mixer for Livestock Feed Meal. JPAIRMultidisciplinary Research, AJA Registrars, Inc

.Ibrahim, S. O. and Fasasi, M. B. 2004 . Design anddevelopment of a portable feed mixer for small-scalepoultry farmers. Proc. NIAE 26, Nov. 28- Dec. 2, Ilorin.

.Marczuk A, Caban J, Savinykh P, Turubanov N and Zyryanov D. 2017. Maintenance research of a horizontal ribbon mixer. Eksploatacja I Niezawodnosc – Maintenance and Reliability 19 (1): 121–125.