PERANCANGAN SISTEM HIDROLIK PADA PINTU WINGBOX BERKAPASITAS 2 TON
Article Sidebar
Main Article Content
Abstract
Currently, many innovations are being made in developing a technology to facilitate human work. One of these technologies is the hydraulic cylinder. Hydraulic cylinders were created to facilitate human work, especially in the industrial sector. Hydraulic cylinder, using a liquid or so-called liquid fluid, to be able to make the hydraulic cylinder work. In the hydraulic cylinder components, there are cylinder axles, pistons and cover seals. In general, hydraulic cylinders can be used for wingboxes. A wingbox is a box on a truck, which can be opened from the side with the help of a hydraulic cylinder. This journal was created to study how the simulation of hydraulic cylinder components when working. The design method used is the reverse engineering method, where the components that have been designed are then simulation is made to find out how strong the component is in holding the load when the component is working. The simulation is carried out using the Autodesk Fusion 360 application to find out how strong the hydraulic cylinder works in bearing the load. The results of this method are obtained when the simulation results of the hydraulic cylinder have been obtained.
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
References
G.S. Kumar, M.S.J.A.K. Narendran, and V. Raveendar, “Design and Analysis of Hydraulic
Cylinder Using Ductile Cast Iron,” pp. 427–429, 2021.
R. Subarkah, S. Pramudita, and G. G. R. Gunadi, “Pengujian Hydraulic Cylinder Pada
Simulator Arm Excavator,” J. Mek. Terap., vol. 1, no. 2, pp. 116–122, 2020, doi:
32722/jmt.v1i2.3358.
O. Engineering, G. J. Zhang, and M. Luoj, “Design and Realization of an,” vol. 8, no. 1, pp.
–200, 2005.
H. Feng, Q. Du, Y. Huang, and Y. Chi, “Modelling study on stiffness characteristics of
hydraulic cylinder under multi-factors,” Stroj. Vestnik/Journal Mech. Eng., vol. 63, no. 7– 8,
pp. 447–456, 2017, doi: 10.5545/sv-jme.2017.4313.
W. Tedja Bhirawa, “Sistem Hidrolik Pada Mesin Industri,” vol. 6, pp. 2–3, 2017.
Syahril and S. R. Ardi, “Analisa Kebocoran Silinder Hidrolik pada Mesin Gravity Casting di
Industry Manufaktur,” J. Tek. Mesin Poli Batam, vol. II, no. 2, pp. 5–16, 2010, [Online].
Available: https://jurnal.polibatam.ac.id/index.php/JI/article/view/327.
Kamsar, “Analisis Sistem Hidrolik Pengangkat Pada Alat Berat Jenis Wheel Loader Studi
Kasus Dinas Pekerjaan Umum Kab. Bombana,” J. Ilm. Tek. Mesin, vol. 1, no. 1, pp. 35– 38,
F. A. G. Nusa and S. Sugiyanto, “Perancangan Sistem Hidrolik pada Unit Mobile Core
Sampler,” J. Nas. Teknol. Terap., vol. 1, no. 1, p. 33, 2017, doi: 10.22146/jntt.34084.
E. Meladiyani, B. Permana, M. Marsudi, and A. Zayadi, “Perancangan Alat Pengangkat Sistem
Hidrolik Tipe H Pada Tempat Pencucian Mobil Dengan Kapasitas Maximum 2.5 Ton,” J. Ilm.
Giga, vol. 21, no. 1, p. 33, 2019, doi: 10.47313/jig.v21i1.582.
M. Al Haramain, R. Effendi, and H. A. Susilo, “Perancangan Silinder Hidrolik Pada Mesin
Molding Karet Dengan Kapasitas 25 Ton,” J. Mesin Teknol. (SINTEK J., vol. 11, no. 1, pp. 55–
, 2017.