ANALISIS KESELAMATAN KERJA MENGGUNAKAN METODE HAZARD IDENTIFICATION RISK ASSESMENT DENGAN PENDEKATAN SPAR-H PADA PT ARGHA PERDANA KENCANA
Article Sidebar
Main Article Content
Abstract
PT Argha Perdana Kencana is engaged in manufacturing molding which produces styrofoam molding tools with manual equipment and machines. The problem of PT Argha at the moment is the high level of work accidents in the machining division, so the purpose of this study is to determine the factors that cause work accidents and the application of an appropriate OHS system to minimize work accidents specifically in the machining division. The method used is the Hazard Identification Risk Assessment (HIRA) with the SPAR-H approach. By knowing the level of hazard risk effects from activities with likelihood and severity criteria and determining the level of risk (risk level) of each activity using the HIRA method, then determining the level of performance shaping factors (PSF) associated with HR and its activities. Based on the HIRA method and the SPAR-H approach, researchers can conclude that the highest occupational accidents in refinement activities are due to the high stress levels on HR at work, the high level of complexity, incomplete work procedures and an un ergonomic work environment. To solve this problem, it is advisable to procure adequate PPE according to standards, retraining workers and standardizing the work environment according to company needs.
Article Details
All publications by Jurnal Ilmiah Teknik Indsutri (Jurnal Keilmuan Teknik dan Manajemen Industri ) [p-ISSN: 2337-5841, e-ISSN: 2355-6528] is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
References
N. Erni, Adianto & Kelvin, “Perbaikan Lingkungan Fisik PT. Rodamas Nuansa Fortuna”, Jurnal Ilmiah Teknik Industri Universitas Tarumanagara, vol. 4, no. 3, hlm. 146-165, 2016.
Angka Kecelakaan Kerja Cenderung Meningkat, BPJS Ketenagakerjaan Bayar Santunan Rp1,2 Triliun, Sumber: https://www.bpjsketenagakerjaan.go.id/berita/23322/Angka- Kecelakaan-Kerja-Cender [diakses 6 Juni 2020]
Djatmiko, R Dwi. Keselamatan dan Kesehatan Kerja. Yogyakarta : Deepublish, 2016.
M.A Sri, Umyati, & Andiyani, “Analisis Penerapan Keselamatan Kerja Menggunakan Metode Hazard Identification Risk Assessment (HIRA) Dengan Pendekatan Fault Tree Anlysis (FTA)”, Jurusan Teknik Industri Fakultas Teknik Universitas Sultan Ageng Tirtayasa, vol.3,no.1, pp. 293-300, 2017.
P.E Hendri, Suroto, dan Kurniawan, “Analisis HIRA (Hazard Identification and Risk Assessment) Pada Instansi X Di Semarang”, Jurnal Kesehatan Masyarakat. Bagian Keselamatan Dan Kesehatan Kerja, Fakultas Kesehatan Masyarakat Universitas Diponegoro,vol.6, no.5, pp. 11-23, 2018.
R. Darmawan, Ummi, dan Umyati, “Identifikasi Risiko Kecelakaan Kerja Dengan Metode Hazard Identification and Risk Assessment (HIRA) Di Area Batching Plant PT XYZ”, Jurnal Teknik Industri. Jurusan Teknik Industri, Fakultas Teknik, Universitas Sultan Ageng Tirtayasa,vol.5, no.3,pp. 308-313, November 2017.
R. Purwaningsih, N. Miranda, N.U Handayani, “Penilaian Budaya Keselamatan dengan Metode SCART (Safety Culture Assesment Review Team) Pada Badan Pengelola Instalasi Nuklir”, Jurnal Teknik Industri Universitas Diponegoro, vol. 14, no. 1, pp. 27- 32, 2019.
R. Sulistiyowati, B. Suhardi, Pujiyanto, “Evaluasi Keselamatan dan Kesehatan Kerja Pada Praktikum Perancangan Teknik Industri II Menggunakan Metode Job Safety Analysis”, Jurnal Teknik Industri Universitas Diponegoro, vol. 14, no. 1,pp. 11-20, 2019.
C.B Sijabat, & N. Sunday,” Application Of Hira And Spar-H Method To Control Work Accident”, Jurnal Teknik Industri. Faculty of Science and Technology, vol. 15, no. 1, pp. 70-79, 2014.
I.W Sukania, “Kajian Ergonomi Terminal Bus Di Jakarta”, Jurnal Ilmiah Teknik Industri Untar, vol. 1, no. 1,pp. 33-40, 2013.
L. Widodo, W. Sukania, & K. Yota, “Rancangan Fasilitas Kerja Pada proses Perakitan Controller di PT Multitanaka Suryatama Berdasarkan Prinsip Ergonomi”, Jurnal Ilmiah Teknik Industri Untar, vol. 6, no. 2,pp. 124-137, 2018.
T.W Saputra, Astuti, & Jauhari, “Penerapan Metode Hazard Identification And Risk Asessment Hira Pada Bengkel Las Sinar Arum Semanggi”, Prosiding SNST ke-9 Tahun 2018, Fakultas Teknik Universitas Wahid Hasyim, hlm. 209-214.
H. Wibowo, “Usulan Perbaikan Sistem Keselamatan Dan Kesehatan Kerja Pada Kawasan Industri Di Karawang”, Jurnal Teknikologi. Jurusan Teknik Kimia, Fakultas Teknik, Universitas Muhammadiyah Jakarta, vol.9, no.1,pp. 49-55, 2017.
A.P Wulandari, “Analisis Human Reliability Pada Operator Maintenance Mesin Untuk Mengendalikan Human Error Dengan Metode SPAR-H Di PT Tjokro Putra Perkasa PT Global Rekayasa Indonesia, vol. 6 no. 3,pp. 269-277, 2017.