ANALISIS LEAN SERVICE GUNA MENGURANGI WASTE YANG TERJADI PADA PROSES OUT GOING JALUR UDARA DI PT. CITRA VAN TITIPAN KILAT (TIKI) CATAMA JOGJA
Article Sidebar
Main Article Content
Abstract
PT. Citra Van Titipan Kilat (TIKI) Catama Jogja is a service company of shipping goods. TIKI applies the principle that the company's success is measured by the perfection of serving customers and the level of Service Level Agreement it has. The problem in this company is the SLA value that is owned is 77.29%, not in accordance with the company's target of 90-95%. This research was conducted to determine what kind of waste is happening, why waste can occur, and how to reduce waste during the service process. The method used in this study is lean service, which is a work methodology that is applied in service companies in order to produce value according to the wishes of consumers by eliminating existing waste. The tools used are VSMS and VALSAT. Selected tools based on VALSAT calculations are PAM and SCRM. Waste that has been identified were waiting, transportation, error, overprocessing, and movement. The proposed improvement plan by reducing the waste that occurs gives the result that the required processing time has decreased by 14.48% or initially 794 sec to 679 sec.
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
All publications by Jurnal Ilmiah Teknik Indsutri (Jurnal Keilmuan Teknik dan Manajemen Industri ) [p-ISSN: 2337-5841, e-ISSN: 2355-6528] is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
References
F.W. Abdul, “Usulan Penerapan Metodologi DMAIC dan Service Blueprint untuk Perbaikan Kualitas Layanan Terhadap Kepuasan pelanggan PT. MUTU,” Jurnal Operations Excellence, vol. 7, no. 3, pp. 326 – 341, Nov. 2015.
M. Agustin, “Rancangan Penerapan Lean Service di Departemen Service Control Guna Meningkatkan Pelayanan Terhadap Pelanggan Internal di Gedung Kantor Pusat PT. XYZ Tbk,” Jurnal Kajian Ilmu dan Teknologi, vol. 5, no. 2, pp. 129 – 135, Okt. 2016.
F. Alpasa, dan L. Fitria, “Penerapan Konsep Lean Service dan DMAIC untuk Mengurangi Waktu Tunggu Pelayanan,” Jurnal Online Institut Teknologi Nasional, vol. 2, no. 3, pp. 108 – 117, Jul. 2014.
C. Gut, “7 Types of Waste in Lean Manufacturing and Lean Services/Lean IT,” 2014, Available: http: //leanguru.pro/7-types-of-waste-in-lean-manufacturing-and-lean-serviceslean-it/
M. Asy’ari, dan D.S. Gabriel, “Perancangan Peningkatan Kualitas Layanan Pelanggan dengan Value Stream Mapping Era Digital di Perusahaan Jasa Survei,” Seminar dan Konferensi Nasional IDEC, 2019, pp. 1-8.
V. Gaspersz, Lean Six Sigma for Manufacturing and Service Industries, 2007, Gramedia Pustaka Utama, Jakarta.
Harliwantip, “Analisa Lean Service Guna Mengurangi Waste pada Perusahaan Daerah Air Minum Banyuwangi,” Jurnal Spektrum Industri, vol. 12, no. 1, Universitas 17 Agustus Banyuwangi.
P. Hines, dan N. Rich, “The Seven Value Stream Mapping Tools,” International Journal of Operations & Production Management, vol. 17, no. 1, pp. 46-64, 1997.
E.A. Mantiri, P. Kindangen, dan M.M. Karuntu, “Pendekatan Lean Manufacturing untuk Meningkatkan Efisiensi dalam Proses Produksi dengan Menggunakan Value Stream Mapping pada CV. Indospice,“ Jurnal EMBA, vol. 5, no. 2, pp. 1292-1303, Jun. 2017.
A. Odi, A.N. Zaman, S.R. Nasution, dan S. Sundana, “Analisis Pengurangan Waste pada Proses Perawatan Kereta,“ Jurnal Ilmiah Rekayasa & Inovasi, vol. 1, no. 1, pp. 34-42, Jan. 2019.
M. Rother dan Shook, Learning to See: Value Stream Mapping to Add Value and Eliminate Muda, 2009, MA : Lean Enterprise, Cambridge.
M.T. Siregar, dan Z.M. Puar, “Implementasi Lean Distribution Untuk Mengurangi Lead Time Pengiriman pada Sistem Distribusi Ekspor,“ Jurnal Teknologi, vol. 10, no. 1, pp. 1-8, Jan. 2018.