An Integrated of AHP–QFD Methodology For Poduct Design: A Review

Article Sidebar

DOWNLOAD
Published: Jul 30, 2020
DOI: https://doi.org/10.24912/jitiuntar.v8i1.6901
Keywords:
QFD AHP’s Model Product Design Integrated method.

Main Article Content

Rosnani Ginting
Department of Industrial Engineering, Universitas Sumatera Utara
Aulia Ishak
Department of Industrial Engineering, Universitas Sumatera Utara

Abstract

Many methods, rules, and techniques are used by some manufacturing companies to enhance product competitiveness by fulfilling customer needs and satisfaction possible by improving product design quality. Many researchers suggest a variety of design tools that were implemented early in the design process. Quality function deployment and Analytical hierarchy process methods are one of them. Some researchers have studied in-depth incorporating these two design techniques in product design and development by focusing on translating the consumers' desire into product design. This paper presents the review, investigates analysis, and discussion of some literature on the QFD combined AHP, which is used for product design, either re-designing existing products or designing new products. Several international journal articles have been selected, collected, and analyzed through several relevant scientific publications published in 2010-2016. An in-depth analysis has been carried out on this paper on the benefit, and drawbacks of the integration method on previous research. This paper provides suggestions based on the analysis of the development of the integration method. Hope this paper could be a reference for researchers and other manufacturing companies to implement QFD-AHP integration method in designing product

Article Details

Issue
Vol. 8 No. 1 (2020): Jurnal Ilmiah Teknik Industri (Jurnal Keilmuan Teknik dan Manajemen Industri)
Section
Articles

All publications by Jurnal Ilmiah Teknik Indsutri (Jurnal Keilmuan Teknik dan Manajemen Industri ) [p-ISSN: 2337-5841, e-ISSN: 2355-6528] is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

References

L Yihong, S. Yunfei, and C. Ting. “Study of New Wall Materials Design Based on TRIZ Integrated Innovation Method”. Management Science and Engineering, 6(4), 15 – 29, 2012.

T. Sakao. “A QFD-Centred Design Methodology for Environmentally Conscious Product Design. International Journal of Production Research, 45(18–19), 4143 – 4162, 2013.

J.Y. Farsi and N. Hakiminezhad. "The integration of QFD Technique, Value Engineering and Design for Manufacture and Assembly (DFMA) during the Product Design Stage”. Journal of Advances in Environmental Biology, 6(7), 2096 – 2104, 2012.

Revelle and B. Jack. The Hand Book of QFD. United State: Acid Free Paper, 2007.

G. Büyüközkan, O. Fiyzioglu and D. Rual. “Fuzzy Group Decision-Making to Multiple Preference Formats in Quality Function Deployment”. Computer Industry, 58(5) 392 – 402,2007.

D.F. Felice and A. Petrillo. “A multiple choice decision analysis: an integrated QFD – AHP model for the assessment of customer needs”. International Journal of Engineering, Science and Technology, Vol. 2, No. 9, 2010, pp. 25-38.

S. Vinodh, V. Kamala, K. Jayakrishna. “Integration of ECQFD, TRIZ, and AHP for Innovative and Sustainable Product Development”. Journal of Applied Mathematical Modelling 38, pp 2758–2770,2014.

C.C. Tseng, C.C. Torng, and S.C. Lin. “Prioritization of Product Design Tasks Using QFD, TRIZ and DSM”. Industrial Engineering and Engineering Management (IE&EM). IEEE 17Th International Conference on 29-31 Oct. 2010, pp. 871 – 875

S. Gupta and G.E. Okudan. “Computer-Aided Generation of Modularised Conceptual Designs with Assembly And Variety Considerations”. Journal of Engineering Design, 19(6), 533 – 551, 2012.

M.H. Pourhasomia, A.A> Khamseh and Y. Ghorbanzad. “A hybrid of Kano and QFD for ranking customers’ preferences: A case study of bank Melli Iran”. 2012.

C.J. Lai, C.H. Hsu, H.M. Kuo. “An Empirical Study of Constructing a Dynamic Mining and Forecasting System for the Life Cycle Assessment-based Green Supply Chain”. Wseas Transactions On Systems, ISSN: 2224-2678, 2012.

K. Naseri. “Algorithm for Cost-optimized QFD Decision-Making Problem”. Evolutionary Intelligence, Volume 9, Issue 1–2, pp 21–36. 2014.

P. Polak and M.M. Bunkowska. “Employing The Quality Function Deployment (Qfd) Method to Support Knowledge Management in Innovation Process Planning”. A Publication of the International Institute for Applied Knowledge Management Volume 5, Issue 2, 2017, pp. 92 - 105.

C.H. Lo, K.C. Tseng, C.H. Chu. “One-Step QFD based 3D morphological charts for concept generation of product variant design”. Expert Systems with Applications. 37 (2010) 7351–7363.

R. Hales and R. Staley. “ Mix target costing, QFD for successful new products”. 1995, Marketing News, 29(1), 18

L. Urban and J.R. Hauser. “Design and marketing of new products”. (2nd Edn.). Englewood Cliffs NJ: Prentice-Hall, 1993.

W. Wattanutchariya and T. Royintarat. “Implementation of quality function deployment and kansei engineering for GABA rice snack development”. Environment and Natural Resources, 10(2):1-10.fra, 2012.

A.B. Goderstad and C. Haskins. “Understanding mission objectives and priorities with QFD”. 26th Annual INCOSE International Symposium, pp. 1-17, 2016.

C.Z. Wu, M.T. Wang, N.T. Liu and T.S. Pan, TS. “Developing a Kano-Based Evaluation Model for Innovation Design”. Mathematical Problems in Engineering, vol. 2015, Article ID 153694, 8 pages.

Y.Z. Mehrjerdi. “Quality function deployment and its extensions”. International Journal of Quality Science merged into International Journal of Quality & Reliability Management. Vol. 27 Issue: 6, pp.616-640, 2010.

Erkarslan, Onder, Y. Hande. “Optimization of The Product Design Through Quality Function Development (QFD) and Analytical Hierarchy Process (AHP): A Case Study in a Ceramic Washbasin. Turkish”. Izmir Institute of Technology, 2011.

P. Polak and M.J. Bunkowska. “Employing The Quality Function Deployment (Qfd) Method to Support Knowledge Management in Innovation Process Planning”. A Publication of the International Institute for Applied Knowledge Management Volume 5, Issue 2, 2017, pp. 92 – 105.

D. Kunecka. “Quality Function Deployment as A Method Used in The Development of The Quality of Education for The Nursing PracticE. General and Professional Education 1/2016 pp. 42-45 ISSN 2084-1469.

A.A. Bashir. “Applying Total Quality Management Tools Using QFD at Higher Education Institutions in Gulf Area (Case Study ALHOSN University)”. International Journal of Production Management and Engineering doi:10.4995/ijpme. pp, 87 – 98, 2016.

Gilbert III, L.R. Omar, Mohammad, A.M. Farid. “An Integrated QFD And Axiomatic Design Methodology for the Satisfaction of Temporary Housing Stakeholders”. Proceedings of ICAD2014 The Eighth International Conference on Axiomatic Design Campus de Caparica – September 24-26, 2014 ICAD-2014-XX.

K. Prasad and S. Chakraborty. “A Quality Function Deployment-Based Model for Cutting Fluid Selection”. Advances in Tribology Volume 2016, Article ID 3978102, 10 pages, 2016.

E.S. Jaiswal. "A Case Study on Quality Function Deployment (QFD)”. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) 3(6), 27 – 35, 2012.

H. Farsijani and M.A> Torabandeh. “Improvement of Efficiency in Product Designing By usage Of Fuzzy QFD & TRIZ: A Case Study on Transfo Company”. AENSI Journals. Journal of Applied Science and Agriculture, 8(4), 451 – 461, 2013.

D. Claudio, J. Chen, Okudan and E. Gül. “A Comprehensive Methodology to Generate and Select Design Ideas”. IIE Annual Conference. Proceedings IIE Annual Conference, 2010.

T.L. Saaty. “How to make a decision: the analytic hierarchy process”, Interfaces, Vol. 24, No. 6, pp.19–43, 1994.

H. Raharjo, A.C. Brombacher, T.N. Goh, B. Bergman. “On integrating Kano's model dynamics into QFD for multiple product design”. Quality and Reliability Engineering International. 351-363, 2010.

G.S. Hundal and S. Kant. “Product Design through QFD Approach with Hybrid of AHP and Fuzzy Logics”. 21 International Proceedings of Economics Development and Research, 112 – 116, 2014.

A.K. Sharma and S. Khandait. “Fuzzy Quality Function Deployment in Online Shopping Websites - Literature Review”. International Journal of Hybrid Information Technology Vol.9, No.4 (2016), pp. 305-318.

Cohen, L. (1995). Quality Function Deployment – How to make QFD work for you. Addison Wesley Longman Inc., USA.

A. Mayyas, Q. Shen, M. Abdelhamid, D. Shan, A. Qattawi, M. Omar, Using Quality Function Deployment and Analytical Hierarchy Process for material selection of Body-In-White. Materials and Design, 32(5), 2771-2782, 2011.

S. Kumar and A. Garnaik. “A Case Study in Chair by Applying Quality Function Deployment & Analytic Hierarchy Process”. International Journal of Innovative Research in Science, Engineering and Technology. Vol. 5, Issue 1, Januray 2016.

M.S. Parvez, S.M.T.A. Rifat, S.M.M. Siddiquei, A.S.M. Hoque. “Optimisation of product design through QFD, AHP, Entropy and TOPSIS method: a case study of a Bathtub”. SSRG International Journal of Industrial Engineering (SSRG-IJIE) – volume 3 Issue 1 – January to February 2016.

D. Haroglu, N. Powell, A.F.M. Seyam.” Prioritizing Sensor Performance Characteristics for Automotive Seat Weight Sensors in Quality Function Deployment (QFD)”. Adv Automob Eng 2016, 5:2 DOI: 10.4172/2167-7670.1000153.

C. Karmaker, P. Halder, S. M. T. Ahmed. “Customer driven quality improvement of a specific product through AHP and entropy based QFD”. 2016. DOI https://doi.org/10.13033/ijahp.v11i3.606