PERANCANGAN ALAT PEMBUAT PAVING BLOCK DARI LIMBAH SAMPAH PLASTIK DENGAN MENGGUNAKAN PENDEKATAN ERGONOMI DAN METODE KANSEI ENGINEERING
Article Sidebar
Main Article Content
Abstract
Plastic is a well-known product that is often found everywhere. The existence of plastic in Indonesia is very important for Indonesian people. However, increasing plastic consumption causes an increase in plastic waste produced. The resulting result is that the environment is dirty and of course unhealthy. One way to reduce plastic waste is to process it into paving blocks with high selling value. However, the current tools are not ergonomic and risk causing workers to experience work-related illnesses. Therefore, it is necessary to design tools that are more ergonomic. This study aims to design a tool for making plastic waste paving blocks using an ergonomic and Kansei Engineering approach. The ergonomics approach aims to obtain the dimensions of the tool that will be designed to suit the dimensions of the human body as the user. Kansei Engineering aims to get the wishes of potential tool users for the plastic waste paving block making tools they will use. The results obtained by the user's wishes are easy to use, easy to move, colorful, bright in color, striking, thick and the design is obtained according to the user's body dimensions. Offers of tools designed to increase the productivity of making paving blocks from plastic waste and user comfort in using them.
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
All publications by Jurnal Ilmiah Teknik Indsutri (Jurnal Keilmuan Teknik dan Manajemen Industri ) [p-ISSN: 2337-5841, e-ISSN: 2355-6528] is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
References
J. Wahyudi, H.T. Prayitno and A.D. Astuti, "Pemanfaatan Limbah Plastik sebagai Bahan Baku Pembuatan Bahan Bakar Alternatif," Jurnal Litbang, vol. XIV, no. 1, pp. 58-67, 2018.
M. Syamsiro, "Kajian Pengaruh Penggunaan Katalis Terhadap Kualitas Produk Minyak Hasil Pirolisis Sampah Plastik," Jurnal Teknik, vol. 5, no. 1, pp. 47-56, 2015.
U.B. Surono, "Berbagai Metode Konversi Sampah Plastik Menjadi Bahan Bakar Minyak," Jurnal Teknik, vol. 3, no. 1, pp. 32-40, 2013.
R. Linda, "Pemberdayaan Ekonomi Kreatif Melalui Daur Ulang Sampah Plastik (Studi Kasus Bank Sampah Berlian Kelurahan Tangkerang Labuai)," Jurnal Al-Iqtishad, vol. 1, no. 12, pp. 1-19, 2016.
A.I.N. Diana and S. Fansuri, "Pelatihan Tentang Pemanfaatan Limbah Botol Plastik sebagai Bahan Campuran Paving Block Ramah Lingkungan," Jurnal Abdiraja, vol. 2, no. 2, pp. 1-5, 2019.
S. Asnur and A. Setiawan, "Sosialisasi Pembuatan Paving Block Cari Limbah Plastik Berbasis Pemberdayaan Masyarakat di Kota Makassar," Jurnal Dedikasi, vol. 22, no. 1, pp. 1-4, 2020.
A.T. Widodo and R.D. Astuti, "Perancangan Alat Bantu untuk Memperbaiki Postur Kerja pada Aktivitas Memelitur dalam Proses Finishing," in Seminar Nasional IENACO, Surakarta, 2015.
D.P. Restuputri, M. Lukman and Wibisono, "Metode REBA untuk Pencegahan Musculoskeletal Disorder Tenaga Kerja," Jurnal Teknik Industri, vol. 18, no. 01, pp. 19-28, 2017.
D. Kusuma, A.H. Faiz, R.D.A. Purba and M.I. Sabit, "Perancangan Alat Tanam Benih Ergonomis dengan Pendekatan Antropometri," in Seminar Nasional IENACO, Surakarta, 2018.
I.A. Soenandi, M. Ginting and B. Marpaung, "Perancangan Ergonomis Tempat Tidur Rumah Sakit," Jurnal Ilmiah Teknik Industri, vol. 1, no. 2, pp. 95-102, 2013.
R. Prabowo and A. Agung, "Disain Alat Ukur Antropometri Melalui Integrasi Metode Kansei Engineering dan Quality Function Deployment," Tekmapro: Journal of Industrial Engineering and Management, vol. 14, no. 2, pp. 60-67, 2019.
Y. Amran, "Pemanfaatan Limbah Plastik untuk Bahan Tambahan Pembuatan Paving Block sebagai Alternatif Perkerasan pada Lahan Parkir di Universitas Muhammadiyah Metro," TAPAK (Teknologi Aplikasi Konstruksi): Jurnal Program Studi Teknik Sipil, vol. 4, no. 2, pp. 125-129, 2015.
Y. Hutabarat, Dasar Dasar Pengetahuan Ergonomi, Malang: Media Nusa Creative, 2017.
F. Abdullah, "Analisis Pengambilan Keputusan dengan Menggunakan Kansei Engineering dan Technique for Order Preference by Similarity to Ideal Solution (Topsis) (Study Kasus Pemilihan Sepeda Motor Yamaha)," NARATIF (Jurnal Ilmiah Nasional Riset Aplikasi dan Teknik Informatika), vol. 02, no. 01, pp. 16-23, 2020.
M.N.A. Muhaemin, "Pengembangan Fungsionalitas Sistem Informasi dengan Pendekatan Kansei Engineering," Infotronik: Jurnal Teknologi Informasi dan Elektronika, vol. 5, no. 1, pp. 43-47, 2020.