PENGUKURAN DAN ANALISIS KECEPATAN REAKSI TERHADAP PERUBAHAN WARNA DAN BUNYI SEBAGAI DASAR DALAM PERANCANGAN ALAT PENGENDALI ERGONOMIS
Bilah Samping Artikel
Isi Artikel Utama
Abstrak
Reaction time is the time span between receiving a stimulus and the initial appearance of a person's response. Many work equipment requires a quick reaction from the operator on the signal displayed. The quick reaction is turning off the engine, pressing the emergency button, braking etc. Quick action is needed, among others, to prevent work accidents, prevent damage to equipment. To find out the characteristics of the speed of reaction to several types of stimuli, a series of experiments was carried out. The study was conducted under normal conditions on 47 respondents in the ergonomics laboratory. Stimulation given changes in color and sound as well as visual cues in the form of moving needles. The calculation results show that the speed of reaction is influenced by the type of stimulus. The highest reaction speed occurs when the stimulus is in the form of a moving pointer, followed by the yellow, green, red buttons, the sound of the alarm and finally the whirring sound. The control board prototype designed using reaction speed characteristic data is equipped with 3 color push buttons that correspond to the color of the indicator light, 1 yellow push button to respond to a whirring sound indicator and an emergency stop button to respond to an alarm sound and a step on by foot switch to respond to indicators moving pointer emergency stop button to respond to the alarm sound as well as a step-by-foot switch to respond to indicators in the form of a moving pointer.
Rincian Artikel
Artikel ini berlisensiCreative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
All publications by Jurnal Ilmiah Teknik Indsutri (Jurnal Keilmuan Teknik dan Manajemen Industri ) [p-ISSN: 2337-5841, e-ISSN: 2355-6528] is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Lamto Widodo, Program Studi Teknik Industri, Fakultas Teknik, Universitas Tarumanagara
Referensi
H. Iridiastadi, Yassierli, Ergonomi Suatu Pengantar, Penerbit Remaja Rosdakarya, 2017.
S. Tarwaka, L. Sudiajeng, Ergonomi Untuk Keselamatan Kesehatan Kerja dan Produktivitas, Surakarta, UNIBA PRESS, 2008.
I.Z. Sutalaksana, R. Anggawisastra, J.H. Tjakraatmadja, Teknik Tata Cara Kerja, Jurusan Teknik Industri, Institut Teknologi Bandung, Bandung, 2006.
L. Boucher, V. Stuphorn, G.D. Logan, J.D. Schall, and T.J. Palmeri, “Stopping eye and hand movements: are the processes independent?,” Percept Psychophys, Vol. 69 No. 5, pp. 785- 801, 2007.
www.google.com, diakses tanggal 12 Mei 2023.
Peraturan Menteri Perhubungan Republik Indonesia Nomor PM 111 tahun 2015 Tentang Tata Cara Penetapan Batas Kecepatan, 2015.
Z. Abidin, A. Sokhibi, “Analisis Potensi Bahaya Menggunakan Metode Checklist sebagai Upaya Pencegahan Kecelakaan Kerja CV. Surya Agritama Indonesia,” Journal of Industrial Engineering and Technology (Jointech), e-ISSN: 2774-3462 Vol. 2, No. 1, pp. 59-71, 2021, p-ISSN: 2723-4711.
Buku Panduan Praktikum Ergonomi dan Perancangan Sistem Kerja, Program Studi Teknik Industri Untar, 2023.
A.W. Syafitri, Y. Supatmo, D.A. Indraswari, “Perbedaan Waktu Reaksi Tangan Antara Cabang Olahraga Permainan Dan Bela Diri,” Jurnal Kedokteran Diponogoro, e-ISSN 2540-8444, Vol. 6, No. 2, pp. 177-187, 2017.
S. Nofita, C.B.T. Salatoen, A.D. Prabaswari, “Analisis Pengaruh Aktivitas Fisik terhadap Kecepatan Reaksi Calon Asisten Laboratorium XYZ,” Seminar dan Konferensi Nasional IDEC, pp. 1-5, 2019.
S. Wulandari, A.A. Hadyanawati, “Analisis Kelelahan Kerja Akibat Aktifitas Fisik terhadap Kecepatan Reaksi Mahasiswa di Daerah Istimewa Yogyakarta,” Prosiding IENACO, pp. 57-61, 2020.
E. Nurmianto, Ergonomi-Konsep Dasar dan Aplikasinya, Prima Printing Surabaya, 2004.
https://jip.gridoto.com/read/261237149/apa-arti-warna-lampu-indikator-di-panelinstrumen diakses 1 Maret 2023.
https://antropometriindonesia.org/index.php/detail/artikel/4/10/data_antropometri.