ANALISIS KINERJA KESELAMATAN DAN KESEHATAN KERJA (K3) PADA PROSES PRODUKSI SAUS DENGAN METODE FAULT TREE ANALYSIS
Article Sidebar
Main Article Content
Abstract
The production process for making sauces requires a performance appraisal so that the results are effective and efficient. In production, performance problems sometimes occur, such as low productivity and accidents. The relationship between employee performance, such as work safety greatly affects work productivity. The purpose of this study was to analyze the performance of K3 which includes the Frequency Rate (FR), Severity Rate (SR), and T-Safety Value (NTS) so that it will produce how big the relationship is between the accident rate and work productivity. This study uses the Fault Tree Analysis (FTA) method where to build an FTA flowchart, it is necessary to identify work accident data, build a safety tree, measure work productivity, and draw conclusions. This research has produced several analyzes using FTA where the FR, SR, and NTS levels can already be known. The results of measuring the FR value show a decrease in the frequency of disability injuries and the severity of work accidents from year to year, there is a decrease from year to year. This research has also succeeded in increasing employee work productivity due to the low value of the FR and SR levels each year. If linked to NTS, every year the relationship between work safety and productivity will improve. So from the results of this analysis, there is a relationship between the frequency of work accidents and the level of work productivity that occurs in the production process.
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
All publications by Jurnal Ilmiah Teknik Indsutri (Jurnal Keilmuan Teknik dan Manajemen Industri ) [p-ISSN: 2337-5841, e-ISSN: 2355-6528] is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
References
C. D. Yuliandi and E. Ahman, “Penerapan Keselamatan Dan Kesehatan Kerja (K3) Di Lingkungan Kerja Balai Inseminasi Buatan (Bib) Lembang,” J. MANAJERIAL, Vol. 18, No. 2, pp. 98–109, 2019, doi: 10.17509/manajerial.v18i2.18761.
H. Kurnia, C. Jaqin, and H. H. Purba, “The PDCA Approach with OEE Methods for Increasing Productivity in the Garment Industry,” J. Ilm. Tek. Ind. J. Keilmuan Tek. dan Manaj. Ind., Vol. 10, No. 1, pp. 57–68, 2022, doi: 10.24912/jitiuntar.v10i1.15430.
Ghika Smarandana, Ade Momon, and Jauhari Arifin, “Penilaian Risiko K3 pada Proses Pabrikasi Menggunakan Metode Hazard Identification, Risk Assessment and Risk Control (HIRARC),” J. INTECH Tek. Ind. Univ. Serang Raya, Vol. 7, No. 1, pp. 56–62, 2021, doi: 10.30656/intech.v7i1.2709.
U. Amrina and N. Elisa, “Application of Sustainable Productivity Management In Footwear Companies By Green Manufacturing Approach,” Sainstech J. Penelit. dan Pengkaj. Sains dan Teknol., Vol. 29, No. 2, pp. 37–42, 2019, doi: 10.37277/stch.v29i2.336.
H. Kurnia, A. S. Putra, and D. Sjarifudin, “Pendampingan Sebagai Upaya Pencegahan Kecelakaan Kerja Operator Forklift Terhadap fasilitas Perusahaan Pada bagian Warehouse,” J. Pengabdi. Pelitabangsa, Vol. 3, No. 02, pp. 81–89, 2022, doi: https://doi.org/10.37366/jabmas.v3i02.1541.
H. Manurung, A. Fahri, H. H. Purba, and H. Kurnia, “Accidence Analysis Work with Failure Mode and Effect Analysis Method at Coating Service Indiustry in Indonesia,” Specktrum Ind. J., Vol. 19, No. 2, pp. 135–144, 2021, doi: 10.12928/si.v19i2.20585.
S. N. Trisaid, “Analisis Risiko Kecelakaan Kerja Pada Kegiatan Rig Service Menggunakan Metode Hirarc Dengan Pendekatan Fta,” J. Ilm. Tek. Ind., Vol. 8, No. 1, pp. 25–33, 2020, doi: 10.24912/jitiuntar.v8i1.6343.
M.R. Lazuardi, T. Sukwika, and K. Kholil, “Analisis Manajemen Risiko Keselamatan dan Kesehatan Kerja Menggunakan Metode HIRADC pada Departemen Assembly Listrik,” J. Appl. Manag. Res., Vol. 2, No. 1, pp. 11–20, 2022, doi: 10.36441/jamr.v2i1.811.
I. Zulkarnaen, Daonil, and A. Supriadi, “Analisis Pengendalian Mutu pada Proses Produksi Pembuatan Kecap Menggunakan Metode Fault Tree Analysis (FTA) dan Metode Failure Mode Efect Analysis (FMEA),” J. Ind. Eng. Syst., Vol. 1, No. 1, pp. 31–44, 2020, doi: 10.31599/jies.v1i1.177.
S. Indragiri and T. Yuttya, “Manajemen Risiko K3 Menggunakan Hazard Identification Risk Assessment and Risk Control (Hirarc),” J. Kesehat., Vol. 9, No. 1, pp. 1080–1094, 2020, doi: 10.38165/jk.v9i1.77.
M.A. Puteri, Harianto, T.J. Saputra, M.A. Simanjuntak, E. Randalangi, A. Salsabila, and A.H.V. Al Farisi, “Analisis Keselamatan Kerja Pada Sistem Pengoperasian Forklift Dan Crane Guna Mencegah Kecelakaan Kerja,” J. Inov. Sains dan Teknol. Kelaut., Vol. 3, No. 1, pp. 32–37, 2022.
S. Aprilia, H. Kurnia, W. T. Setyawan, E. Ashar, and A. Wahyudi, “Peninjauan Keselamatan dan Kesehatan (K3) Terhadap Aktifitas Kerja Karyawan di Berbagai
Perusahaan Secara Kajian Sisitematik,” Ind. Xplore, Vol. 8, No. 2, pp. 203–211, 2023, doi: 10.36805/teknikindustri.v8i1.5102.
A. A. C. Sudarni and A. D. Wantira, “Pemodelan Persamaan Struktural Variabel Budaya Keselamatan Pada Area Produksi Industri Baja,” J. Ilm. Tek. Ind., Vol. 10, No. 2, pp. 151–160, 2022, doi: 10.24912/jitiuntar.v10i2.16664.
S. Makhmudah, R. A. Pratama, H. Kurnia, N. F. Zakaria, and A. Nurdin, “Perancangan Sistem Kerja di Berbagai Industri Manufaktur: Kajian Literature Review,” J. Tek. Ind., Vol. 2, No. 1, pp. 51–57, 2021, doi: 10.37366/JUTIN0302.8392.
K. A. Mkalaf, “Total Productive Maintenance: A Safety Approach to Optimize the Anesthesia Device Outcomes,” ICITM 2020 - 2020 9th Int. Conf. Ind. Technol. Manag., pp. 122–126, 2020, doi: 10.1109/ICITM48982.2020.9080374.
I. Sofani, Y. Wulandari Tanjung, H. Kurnia, I. P. Ningrum, and R. N. Saputro, “Tinjauan Sistematik Pada Perancangan Sistem Kerja Di Industri Manufaktur Indonesia,” J. Ind. Eng. Syst., Vol. 3, No. 2, pp. 85–92, 2022, doi: 10.31599/jies.v3i2.1695.
Y. Yusmita, H. Hasanah, R. Guspita, D. Armanda, and M.F. Azzikri, “Penerapan Ergonomi K3 dalam Proses Pengelasan,” JUTIN, Vol. 3, No. 2, pp. 19–22, 2020.
J. D. Fairussihan and Dwisetiono, “Analisis Risiko Keselamatan Dan Kesehatan Kerja (K3) Pada Proses Perbaikan Kapal di PT. Dock Dan Perkapalan Surabaya Menggunakan Metode Hirarc (Hazard Identification, Risk Assessment, And Risk Control),” Hexag. J. Tek. dan Sains, Vol. 3, No. 1, pp. 10–16, 2022, doi: 10.36761/hexagon.v3i1.1340.
J. F. W. Peeters, R. J. I. Basten, and T. Tinga, “Improving failure analysis efficiency by combining FTA and FMEA in a recursive manner,” Reliab. Eng. Syst. Saf., Vol. 172, No. April 2017, pp. 36–44, 2018, doi: 10.1016/j.ress.2017.11.024.
Y. Saputra, A. Turseno, and T. H. Saepudin, “Analisa Keselamatan Kerja dengan Pendekatan Fault Tree Analysis di PT. Indotech Mitra Presisi,” J. InTent, Vol. 5, No. 2, pp. 1–15, 2022.
R. A. Imran, J. T. Industri, F. Teknik, and U. J. Soedirman, “Identifikasi hazard Pada Proses Produksi Billet Pada Area Tungku Peleburan Dengan Metode Hirarc (Studi Kasus: PT. XYZ),” J. Ilm. Tek. Ind., Vol. 8, No. 3, pp. 153–160, 2020.
S. Sarinah, A. O. Putri, and I. Tanjung, “Pengaruh Pelaksanaan Ramp Check Terhadap Keselamatan Penerbangan Di Terminal Ii Bandar Udara Soekarno-Hatta,” J. Manaj. Bisnis …, Vol. 5, No. 1, pp. 79–86, 2018.
I.K.P. Wirya Sanjaya and P.E.D. Angga Dana, “Analisa Tingkat Kesehatan Lembaga Perkreditan Desa (LPD) Ditinjau dengan Metode Capital, Assets, management, Earning dan Liquidity (Studi Kasus pada LPD di Kecamatan Kuta),” KRISNA Kumpul. Ris. Akunt., Vol. 9, No. 2, p. 71, 2018, doi: 10.22225/kr.9.2.478.71-76.
M. Marlee and H. Sulistio, “Analisis Korelasi Faktor Penerapan K3 Terhadap Kinerja Waktu Pada Proyek Konstruksi,” JMTS J. Mitra Tek. Sipil, Vol. 1, No. 1, p. 220, 2018, doi: 10.24912/jmts.v1i1.2260.
J. W. Creswell, Research-Design_Qualitative-Quantitative-and-Mixed-Methods-Approaches Forth Edition, Fourth Edi. United Kingdom: Sage Publication Ltd, 2014.
H. Suliantoro, N. Susanto, H. Prastawa, I. Sihombing, and A. Mustikasari, “Penerapan Metode Overall Equipment Effectiveness (Oee) Dan Fault Tree Analysis (Fta) Untuk Mengukur Efektifitas Mesin Reng,” J@ti Undip J. Tek. Ind., Vol. 12, No. 2, p. 105, 2017, doi: 10.14710/jati.12.2.105-118.
A. S. Mariawati, A. Umyati, and F. Andiyani, “Analisis penerapan keselamatan kerja menggunakan metode Hazard Identification Risk Assessment (HIRA) dengan
pendekatan Fault Tree Anlysis (FTA),” Ind. Serv., Vol. 3c, No. 1, pp. 293–300, 2017, [Online]. Available: https://jurnal.untirta.ac.id/index.php/jiss/article/view/2108
D. Handoko, I. Soedarso, and S. Sunaryo, “Analisa Pengaruh Keselamatana Dan Kesehtan Kerja(K3) Pada Pekerja Bangunan Grdung Penataan Ruang Kementrian Pekerjaan Umum,” J. Konstr., Vol. 5, No. 2, pp. 19–25, 2014.
I. Muhammad and I. H. Susilowati, “Analisa Manajemen Risiko K3 Dalam Industri Manufaktur Di Indonesia: Literature Review,” PREPOTIF J. Kesehat. Masy., Vol. 5, No. 1, pp. 335–343, 2021, doi: 10.31004/prepotif.v5i1.1635.
D. Sihombing, “Implementasi keselamatan dan kesehatan kerja (k3) pada proyek di kota bitung,” J. Sipil Statik, Vol. 2, No. 3, pp. 124–130, 2018.
D. L. Trenggonowati and N. M. Arafiany, “Pengendalian Kualitas Produk Baja Tulungan Sirip 25 dengan Menggunakan Metode SPC di PT. Krakatau Wajatama Tbk.,” J. Ind. Serv., Vol. 3, No. 2, pp. 122–131, 2018.