ANALISIS PENGENDALIAN KUALITAS PROSES PRODUKSI SOL SANDAL PADA PT. CIPTA PRIMA

Main Article Content

Charles Wiryahadi Kusuma
Carla Olyvia Doaly

Abstract

In the production process, the company must maintain the quality of the products produced. Maintained quality will increase the company's competitiveness. PT. Cipta Prima maintains product quality by conducting quality inspections of each product produced. In the period from September 20, 2021 to October 25, 2021, PT Cipta Prima produced a total of 265,104 pieces of sandal soles and shoes made of rubber. Rubber is a good material for soles of sandals and shoes. There are 2 defects, namely, Excessive Paint and Damaged Rubber with a total of 27,133 defects. To reduce these defects, it is necessary to analyze the production process. The analysis is carried out using tools in the form of P Control Map, Pareto Diagram, Fishbone Diagram and Why – why Analysis. Based on the results of the analysis that has been carried out, one of the influencing factors is workers who are less trained and lack of machine maintenance. The solution needed for this problem is to increase the standard of hiring workers at PT. Cipta Prima, provides training for workers on a regular basis to comply with SOPs and machine maintenance is carried out regularly so that it is always optimal and standardizes the order of the production line and ensures that all workers carry it out according to standards and then improves the lighting section on the production floor. It is hoped that the solutions provided can improve the quality of products from PT. Prima Cipta.

Article Details

Section
Articles

References

Anggara, Yuda. 2014. “Pengendalian Kualitas produk dengan menggunakan metode six sigma”.

Jurnal teknik industry. Hal 1 – 12

Asri, Muhlis M. 2015. Perbandingan Peta Kendali Atribut Dalam Pengendalian Kualitas Produk

di PT Arika Kharisma Agung. Makassar: Universitas Hasanuddin.

Bilsel, R. Ufuk and Lin, Dennis K.J. “Ishikawa Cause and Effect Diagrams Using Capture

Recapture Techniques”. Quality Technology & Quantitative Management (QTQM) Vol 9

No. 2. 2012: PP 137 – 152.

Harmando. 2012. “Pendekatan six sigma untuk menganalisis kualitas produk studi kasus PT.

Media Nusantara Press”. Jurnal. Universitas Guna Darma

Yemima. 2014. Penerapan Peta Kendali Demerit dan Diagram Pareto pada Pengontrolan

Kualitas Produksi. Skripsi S1. Universitas Mulawarman.

Yuniarto, H.A. (2012). Perbaikan pada Fishbone Diagram sebagai Root Cause Analysis Tool.

Yogyakarta: Jurnal Teknik Industri. ISSN: 1411-6340