ANALISA TINGKAT KERUSAKAN PRODUKSI KEMASAN KARTON MENGGUNAKAN METODE SIX SIGMA DI PT XYZ
Bilah Samping Artikel
Read Counter : 23
Download : 19
Isi Artikel Utama
Abstrak
PT XYZ is a manufacturer engaged in the field of cardboard packaging producers. Cardboard products are needed by traders to wrap their products safely until they reach consumers. Cardboard packaging is often found in various forms of defects in its production. The increase in defect production is a concern because it is detrimental to the company. The study was conducted to help the company identify production defects that occur in the cardboard packaging printing process. The analysis in this study used descriptive quantitative methods and Six Sigma DMAIC. This study uses a number of data from field observations and interviews with company employees, as well as data documentation owned by the company. So this study was conducted to improve product quality, find out the causes of defects in the production process, and provide suggestions for improvements and control of product quality. Based on the results of the study, the highest type of defect was found in uneven gluing and asymmetrical cardboard cutting. The cause of this was due to human factors that did not pay attention to the company's operational standards and suboptimal procedure forms.
Rincian Artikel
Artikel ini berlisensiCreative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Referensi
[1] F. Imansuri, T. Chayatunnufus, Safril, F. Sumasto, B.H. Purwojatmiko, and D. Salati, “Reducing defects using DMAIC methodology in an automotive industry,” SPEKTRUM INDUSTRI, vol. 22, no. 1, pp. 1–13, 2024.
[2] A.D. Sutanto and A. Suseno, “Identifikasi cacat cetak proses produksi kemasan fleksibel di unit printing PT. ACP dengan metode Six Sigma DMAIC,” Industrika J. Ilm. Tek. Ind., vol. 8, no. 4, pp. 867–878, 2024.
[3] M.E. Apriyanti, “Pentingnya kemasan terhadap penjualan produk perusahaan,” sosio e-kons, vol. 10, no. 1, pp. 20–27, 2018.
[4] S. Teja, A. Ahmad, and L. Laricha S., “Peningkatan Kualitas Produksi Pakaian pada Usaha Konveksi Susilawati dengan Berbasis Metode Six Sigma,” Jurnal Ilmiah Teknik Industri, vol. 10, no. 1, pp. 9–20, 2022.
[5] A.S. Herlambang and E. Komara, “Pengaruh Kualitas Produk, Kualitas Pelayanan, Dan Kualitas Promosi Terhadap Kepuasan Pelanggan (Studi kasus pada Starbucks Coffee Reserve Plaza Senayan),” Jurnal Ekonomi, Manajemen dan Perbankan, vol. 7, no. 2, pp. 56-64, 2021.
[6] W.I. Aghitsni and N. Busyra, “Pengaruh Kualitas Produk Terhadap Keputusan Pembelian Kendaraan Bermotor di Kota Bogor,” Jurnal Ilmiah MEA (Manajemen, Ekonomi, dan Akuntansi), vol. 6, no. 3, pp. 38 51, 2022.
[7] S.W. Ramadhany and A. Sumantika, “Analisis Pengendalian Kualitas Produk Cacat Housing pada PT XYZ,” Jurnal Comasie, vol. 7, no. 2, pp. 136–145, 2022.
[8] Y.W. Putra, H.J. Kristina, and M.A.Saryatmo, “Penerapan Lean Six Sigma pada Upaya Peningkatan Kualitas dan Efisiensi Proses pada Produksi Embossed Signage,” Jurnal Mitra Teknik Industri, vol. 3, no. 3, pp. 222–232, 2024.
[9] V. Gasperz, Pengantar Six Sigma, Jakarta: PT Gramedia Pustaka Utama, 2007.
[10] A. Nugraha and A. Kusumawati, “Perbaikan Kualitas Produk Cangkul Dengan Metode Six Sigma (DMAIC) di BLKK Al-Insan,” J. Intent J. Ind. Teknol. Terpadu, vol. 7, no. 1, pp. 59–69, 2024.
[11] S. Tuasamu, J. Sahupala, and T.D. Kaisupy, “Penerapan metode Six Sigma dengan konsep DMAIC sebagai alat pengendalian kualitas produk,” Indo-Fintech Intellect. J. Econ. Bus., vol. 3, no. 1, pp. 36–48, Apr. 2023.
[12] R. Oktaviani, H. Rachman, M.R. Zulfikar, and M. Fauzi, “Pengendalian Kualitas Produk Sachet Minuman Serbuk Menggunakan Metode Six Sigma DMAIC,” Jurnal Taguchi: Jurnal Ilmiah Teknik dan Manajemen Industri, vol. 2, no. 1, pp. 122–130, 2022.
[13] M.R. Rosyidi, Buku Ajar Pengendalian dan Penjaminan Mutu, Malang: Ahlimedia Press, 2020.
[14] D.A. Ridho and S. Suseno, “Analisis Pengendalian Kualitas Produk dengan Metode Lean Six Sigma pada PT. Djohartex,” Jurnal Inovasi dan Kreativitas (JIKa), vol. 2, no. 2, pp. 64-82, 2023.