PERANCANGAN LUMBAR SUPPORT TERHADAP KELUHAN MUSKULOSKELETAL PADA LINGKUNGAN KERJA PERKANTORAN
Article Sidebar
Read Counter : 32
Download : 25
Main Article Content
Abstract
Office workers are at high risk of developing musculoskeletal disorders due to prolonged static sitting positions. This study was conducted at the Indonesia Exim bank to explore the relationship between office chair design particularly the presence of lumbar support and musculoskeletal complaints. The methods used included questionnaires, as well as assessments using RULA and the Nordic Body Map, involving 32 participants. The results indicated that the lower back and waist were the most frequently reported areas of discomfort. Although the chairs used were ergonomically designed, the lumbar support was not optimal. By designing a lumbar support based on anthropometric data, a significant improvement in posture comfort was observed.
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
References
1. D. Mayasari, and F. Saftarina, “Ergonomi sebagai Upaya Pencegahan Musculoskeletal Disorders pada Pekerja,” Jurnal Kedokteran dan Kesehatan Universitas Lampung, vol. 1, no. 2, pp. 369–379, 2016.
2. T. Widodo, and E. Setyawan, “Re-desain Fasilitas Kerja Kursi Ergonomi untuk Mengurangi Risiko Musculoskeletal Disorders Mengacu pada Nilai Antropometri di PT. X,” Jurnal Ilmiah Teknik dan Manajemen Industri, vol. 1, no. 1, 65-77, 2021.
3. D.R. Prakoso, and S. Hartini “Analisis Perancangan Kursi Ergonomi untuk Mengurangi Keluhan Otot pada Pekerja Fungsi Human Capital PT. Pertamina Trans Kontinental Jakarta Pusat,” Industrial Engineering Online Journal, vol. 13, no. 3, 2024.
4. I. Raning, and R. Tosepu, “Perancangan Kursi Ergonomis untuk Mengurangi Risiko
Kelainan Muskuloskeletal pada Mahasiswa Kidal: Literature Review,” Jurnal Promotif
Preventif, vol. 6, no. 3, pp. 479-485, 2023.
5. A. Amri, F. Fatimah, and Y. Yusnidar, “Perancangan Kursi yang Ergonomis sebagai Alat Bantu di Stasiun Kerja Produksi Air Galon,” Malikussaleh Industrial Engineering Journal, vol. 4, no. 2, pp. 17-23, 2015.
6. A.A. Hidayatullah, Y. Mauluddin, and D.T. Utama, “Perancangan Kursi dan Meja
Penjahit yang Ergonomis untuk Meningkatkan Produktivitas Kerja,” Jurnal Kalibrasi, vol. 22, no. 1, pp. 33-42, 2024.
7. H.Y. Wijaya, I.M.D.B. Penindra, and B.E.I. Sitanggang, “Desain Meja dan Kursi Ergonomis dengan Metode REBA dan Antropometri untuk Mencegah Musculoskeletal Disorders,” Kohesi: Jurnal Sains dan Teknologi, vol. 4, no. 6, pp. 11–20, 2024.
8. Alodokter, “Mencegah Efek Duduk Terlalu Lama dengan Kursi Ergonomis,” 2024. Diakses dari https://www.alodokter.com/mencegah-efek-duduk-terlalu-lama-dengan-kursi ergonomisAlodokter
9. Kementerian Kesehatan RI., “Kursi-kursi Ergonomis – Sehat Negeriku,” 2024. Diakses
dari https://sehatnegeriku.kemkes.go.id/baca/blog/20240110/3544705/kursi kursi-ergonomis/Sehat Negeriku
10. M. Sydor, and M. Hitka, “Chair Size Design Based on User Height,” Biomimetics, vol. 8, no. 1, pp. 1–15, 2023.
11. World Health Organization “Obesity and Overweight,” 2021. Diakses dari https://www.who.int/news-room/fact-sheets/detail/obesity-and-overweight