PERANCANGAN FLYWHEEL HOLDER YANG ERGONOMIS UNTUK MEMPERCEPAT PROSES KERJA
Article Sidebar
Read Counter : 22
Download : 16
Main Article Content
Abstract
The high number of motorcycles in Indonesia increases the need for regular servicing, especially for the CVT system. However, the CVT servicing process in motorcycle repair shops still faces obstacles such as limited tools, the risk of injury due to component fitting, and low mechanical work efficiency. This study aims to design an ergonomic Flywheel Holder to improve comfort, safety, and work speed when removing CVT components. The design method uses the VDI 2221 approach for systematic design, TRIZ for design problem solving and ergonomic principles to adapt the tool to the mechanic's working conditions. Data were obtained through observation,
interviews, Likert scale questionnaires, and time studies, and validity and reliability tests were conducted on data collection instruments. The results showed that the average temperature of the pulley during the service process reached 56.1℃, making it unsafe to touch directly by hand. The designed tool was proven to be able to hold the pulley stably, speed up the service process, and improve work safety. This design is the right solution to support the efficiency and ergonomics of motorcycle repair shops.
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
References
[1] A. Novelino, “Jumlah Kendaraan di Indonesia Tembus 164 Juta Unit, 83 Persen Motor,” CNN Indonesia, 2024. [Online]. Available: https://www.cnnindonesia.com/otomotif/20241004133318-579-1151516/jumlahkendaraan-di-indonesia-tembus-164-juta-unit-83-persen-motor
[2] F. Ilyas, “Perancangan Alat Bantu Kerja untuk Mempermudah Pekerjaan Mekanik,” Laporan PKM-T, Program Studi Teknik Industri, Universitas Bina Darma Palembang, 2021.
[3] H. Agustin, M.E. Saputro, S.M.M. Idrus, A. Fajrianty, N. Nurrohmah, M. Nawang S., N. Yudhistira, and A. Padya P., “Edukasi Manual Material Handling untuk Pencegahan Musculoskeletal Disorders pada Pekerja Industri Katering di Desa Banguntapan Bantul,” JATTEC, vol. 1, no. 2, pp. 63–73, 2020.
[4] B. Istiar, M. Sahri, D.A. Irfansyah, R.A. Ratriwardhani, and A.A. Firmansyah, “Sosialisasi Pengetahuan Ergonomi Kerja kepada Karyawan CV. Rahayu Sentosa,” Community Development Journal: Jurnal Pengabdian Masyarakat, vol. 5, no. 1, pp. 317–320, 2024.
[5] I.W. Sukania, “Perancangan Alat Bantu Kerja Berdasarkan Analisis Ergonomi Postur Kerja dan Keluhan Biomekanik Tenaga Mekanik Motor di Sebuah Bengkel Motor di Tangerang,” J. Ilm. Teknik Industri, vol. 8, no. 1, pp. 34–42, 2020.
[6] G. Pahl, W. Beitz, J. Feldhusen, and K.H. Grote, Engineering Design, London: Springer, 2007.
[7] L.O. Hidayat, “Studi Sustainability Competitive Advantage Pada Rumah Sakit Swasta di Kota Makassar,” Disertasi, Universitas Hasanuddin, 2022.
[8] G.S. Edhi, “Desain Matras Multifungsi Dengan Menggunakan Metode TRIZ dan QFD,” Tugas Akhir, Universitas Islam Indonesia, 2016.
[9] Y. Utami, P.M. Rasmanna, and Khairunnisa, “Uji Validitas dan Uji Reliabilitas Instrumen Penilaian Kinerja Dosen,” J. Sains dan Teknologi, vol. 4, no. 2, pp. 21–24, 2023.
[10] F.N. Aini, “Analisis Produktivitas Penggunaan Alat Berat menggunakan Metode Time Study pada Pekerjaan Timbunan Tanah,” Tugas Akhir, Universitas Islam Indonesia, 2024.